首页> 外文期刊>Optical Communications and Networking, IEEE/OSA Journal of >P4 Edge node enabling stateful traffic engineering and cyber security
【24h】

P4 Edge node enabling stateful traffic engineering and cyber security

机译:P4 Edge节点可实现状态流量工程和网络安全

获取原文
获取原文并翻译 | 示例

摘要

Next-generation edge nodes interfacing innovative IT clusters, 5G fronthaul, and internet of things (IoT) gateways to the optical metro/core network will require advanced and dynamic online quality of service (QoS) per-flow traffic treatment, assuring ultra-low latency requirements. However, current software-defined networking (SDN) implementations (e.g., OpenFlow) do not support forwarding procedures based on the network state, profile variations, and the history of flow statistics at the node level. Currently, such procedures require intervention by the SDN controller, leading to scalability issues and additional latency in data plane forwarding. Moreover, severe security challenges are expected to affect such nodes and threaten IT resources. Thus, increasing bandwidths will require direct deep packet inspection to avoid involvement of the SDN controller, as performed currently, or dedicated and costly security systems. This paper leverages on the potential of the programming protocol-independent packet processors (P4) open source language, recently introduced by the inventors of OpenFlow, to program the data plane structure and behavior of an SDN switch. P4 is able to instantiate custom pipelines and stateful objects, enabling complex workflows, user-defined protocols/headers, and finite state machines enforcement. Moreover, P4 allows portable implementations over different hardware targets, thus opening the way to open source fully programmable devices. Special effort is dedicated to motivate and apply P4 within a multilayer edge scenario, proposing the architecture and the applicability of an SDN P4-enabled packet-over-optical node. Moreover, three specific multilayer use cases covering dynamic traffic engineering (TE) (e.g., traffic offload and optical bypass) and cybersecurity (e.g., distributed denial of service port scan) are discussed and addressed through P4-based solutions. Experimental evaluations have been conducted over a multilayer SDN network exploiting reference P4 software switches (i.e., the behavioral model version 2, or BMV2) and field-programmable gate arrays (FPGAs) at 10 gigabit Ethernet optical interfaces. Extensive results report effective dynamic TE and cybersecurity mitigation enforcement at P4 switches without any controller intervention, showing excellent scalability performance and overall latencies practically in line with current commercial OpenFlow switches.
机译:连接创新IT集群,5G前传和光纤到城域网/核心网的物联网(IoT)网关的下一代边缘节点将需要高级和动态的在线服务质量(QoS)每流流量处理,以确保超低流量延迟要求。但是,当前的软件定义网络(SDN)实施(例如OpenFlow)不支持基于网络状态,配置文件变化以及节点级别的流统计历史的转发过程。当前,此类过程需要SDN控制器的干预,从而导致可伸缩性问题和数据平面转发中的额外延迟。此外,预计严峻的安全挑战会影响此类节点并威胁IT资源。因此,增加带宽将需要直接进行深度数据包检查,以避免像当前执行的那样,SDN控制器或专用且昂贵的安全系统参与其中。本文利用了OpenFlow的发明者最近引入的与编程协议无关的分组处理器(P4)开源语言的潜力来对SDN交换机的数据平面结构和行为进行编程。 P4能够实例化自定义管道和有状态对象,从而实现复杂的工作流程,用户定义的协议/标头和有限状态机强制实施。而且,P4允许在不同的硬件目标上实现便携式实现,从而为开源完全可编程的设备开辟了道路。专门的工作致力于在多层边缘场景中激励和应用P4,提出了启用SDN P4的光分组数据节点的体系结构和适用性。此外,通过基于P4的解决方案讨论并解决了三个特定的多层用例,它们涵盖了动态流量工程(TE)(例如流量卸载和光旁路)和网络安全(例如分布式拒绝服务端口扫描)。已经在多层SDN网络上进行了实验评估,这些网络使用了参考P4软件交换机(即行为模型版本2或BMV2)和10吉比特以太网光接口的现场可编程门阵列(FPGA)。广泛的结果表明,在没有任何控制器干预的情况下,在P4交换机上有效地动态实施了TE和网络安全缓解措施,显示出出色的可扩展性和总体延迟,几乎与当前的商用OpenFlow交换机一致。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号