TOTAL HEMISPHERICAL EMISSIVITY OF POTENTIAL STRUCTURAL MATERIALS FOR VERY HIGH TEMPERATURE REACTOR SYSTEMS: HASTELLOY X

摘要

An experimental system was constructed in accordance with the standard ASTM C835-06 to measure the total hemispherical emittance (emissivity) of structural materials of interest in very high temperature reactor (VHTR) systems. First, data were acquired for 304 stainless steel as well as for oxidized and unoxidized nickel, and good reproducibility and agreement with the literature was found. Emissivity of Hastelloy X was then measured under different conditions that included (a) "as received" (original sample) from the supplier, (b) with increased surf ace roughness, (c) oxidized, and(d) graphite coated. Measurements were made over a wide range of temperatures. Hastelloy X, as received from the supplier, was cleaned before additional roughening of the surface and coating with graphite. The emissivity of the original samples (cleaned after received) varied from -0.18 to 0.28 in the temperature range of 473 to 1498 K. The apparent emissivity increased only slightly as the roughness of the surface increased (without corrections for the increased surface area due to the increased surface roughness). When Hastelloy X was coated with graphite or was oxidized, however, its emissivity was observed to increase substantially. With a deposited graphite layer on the Hastelloy, increases from 0.2 to 0.53 at 473 K and from 0.25 to 0.6 at 1473 K were observed-a finding that has strong favorable safety implications in terms of decay heat removal in postaccident VHTR environments. Initial oxidation of Hastelloy X surfaces was observed to notably increase the emissivity of the Hastelloy X but was not observed to progress significantly beyond the initial oxidation even with more prolonged exposure. Since there is likely to be initial surface oxidation of any Hastelloy X used in the construction of VHTRs, this represents an essentially neutral finding in terms of the safety implications in postaccident VHTR environments.