首页> 外文期刊>Mathematical Problems in Engineering >A Novel Approach Based on MEMS-Gyro's Data Deep Coupling for Determining the Centroid of Star Spot
【24h】

A Novel Approach Based on MEMS-Gyro's Data Deep Coupling for Determining the Centroid of Star Spot

机译:基于MEMS-陀螺仪数据深度耦合的新方法确定星点质心

获取原文
获取原文并翻译 | 示例

摘要

The traditional approach of star tracker for determining the centroid of spot requires enough energy and good shape, so a relatively long exposure time and stable three-axis state become necessary conditions to maintain high accuracy, these limit its update rate and dynamic performance. In view of these issues, this paper presents an approach for determining the centroid of star spot which based on MEMS-Gyro's data deep coupling, it achieves the deep fusion of the data of star tracker and MEMS-Gyro at star map level through the introduction of EKF. The trajectory predicted by using the angular velocity of three axes can be used to set the extraction window, this enhances the dynamic performance because of the accurate extraction when the satellite has angular speed. The optimal estimations of the centroid position and the drift in the output signal of MEMS-Gyro through this approach reduce the influence of noise of the detector on accuracy of the traditional approach for determining the centroid and effectively correct the output signal of MEMS-Gyro. At the end of this paper, feasibility of this approach is verified by simulation.
机译:恒星跟踪仪确定斑点质心的传统方法需要足够的能量和良好的形状,因此相对较长的曝光时间和稳定的三轴状态成为维持高精度的必要条件,这限制了其更新速度和动态性能。针对这些问题,本文提出了一种基于MEMS-Gyro数据深度耦合的恒星点质心确定方法,通过介绍,实现了恒星跟踪器数据与MEMS-Gyro恒星图水平的深度融合。 EKF。通过使用三个轴的角速度预测的轨迹可用于设置提取窗口,由于在卫星具有角速度时可以精确提取,因此可以提高动态性能。通过该方法对质心位置和MEMS-陀螺仪的输出信号中的漂移的最佳估计减小了检测器的噪声对传统确定质心的方法的准确性的影响,并有效地校正了MEMS-Gyro的输出信号。最后,通过仿真验证了该方法的可行性。

著录项

  • 来源
    《Mathematical Problems in Engineering》 |2012年第8期|403584.1-403584.20|共20页
  • 作者单位

    State Key Laboratory of Precision Measurement Technology and Instruments, Department of Precision Instruments and Mechanology, Tsinghua University, Beijing 100084, China;

    State Key Laboratory of Precision Measurement Technology and Instruments, Department of Precision Instruments and Mechanology, Tsinghua University, Beijing 100084, China;

    State Key Laboratory of Precision Measurement Technology and Instruments, Department of Precision Instruments and Mechanology, Tsinghua University, Beijing 100084, China;

    State Key Laboratory of Precision Measurement Technology and Instruments, Department of Precision Instruments and Mechanology, Tsinghua University, Beijing 100084, China;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号