...
首页> 外文期刊>Materials & design >Failure and strength of 2D-C/SiC composite under in-plane shear loading at elevated temperatures
【24h】

Failure and strength of 2D-C/SiC composite under in-plane shear loading at elevated temperatures

机译:高温下面内剪切载荷下2D-C / SiC复合材料的破坏和强度

获取原文
获取原文并翻译 | 示例
           

摘要

In-plane shear strength (IPSS) of a two-dimensional carbon fiber reinforced silicon carbide composite (C/ SiC) was measured by compression of double-notched specimens (DNS) from room temperature to 1873 K. The result indicates that the compression of DNS is an effective method to measure IPSS of C/ SiC. A significant dependence of IPSS on temperature was found for C/SiC. IPSS increases with increasing temperature up to 1273 K, and then decreases when the temperature was higher. The main failure modes under the shear loading contain matrix cracking, delamination and pullout of fibers and fiber bundles.
机译:二维碳纤维增强碳化硅复合材料(C / SiC)的面内剪切强度(IPSS)是通过从室温到1873 K的双缺口样品(DNS)压缩来测量的。 DNS是一种测量C / SiC IPSS的有效方法。对于C / SiC,发现IPSS对温度的依赖性很大。 IPSS随温度升高(最高达到1273 K)而增加,然后在温度较高时降低。剪切载荷作用下的主要破坏模式包括基体开裂,分层以及纤维和纤维束的拉出。

著录项

  • 来源
    《Materials & design》 |2011年第6期|p.3504-3508|共5页
  • 作者单位

    National Key Laboratory of Thermostructure Composite Materials, Northwestern Polytechnical University, Xi'an 710072, PR China;

    National Key Laboratory of Thermostructure Composite Materials, Northwestern Polytechnical University, Xi'an 710072, PR China;

    National Key Laboratory of Thermostructure Composite Materials, Northwestern Polytechnical University, Xi'an 710072, PR China;

    National Key Laboratory of Thermostructure Composite Materials, Northwestern Polytechnical University, Xi'an 710072, PR China;

    National Key Laboratory of Thermostructure Composite Materials, Northwestern Polytechnical University, Xi'an 710072, PR China;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号