The effect of stirring rate on semisolid stirring brazing of SiC_p/A356 composites in air

摘要

This paper explores the possibilities of joining SiC_p/A356 composites using semisolid Zn27Al filler metal with aid of mechanical stirring. Moreover, the effect of stirring rate on the macro-appearance, micro-structure, bonded ratio, braze metal ratio of joints and the tensile strength of joints were investigated. Experimental results show that the bonded ratio of interface, braze metal ratio and the tensile strength of the joints is rise with increasing of stirring rate. It is indicated that increasing of stirring rate will promote the disruption of oxide film on surface of composites so as to enhance metallurgical bonds at joint interface. In addition, increasing of stirring rate will also promote formation to fine brittle η-Zn phase and its uniform distribution in bond.