...
首页> 外文期刊>Journal of marine science and technology >Investigations of vehicle securing without lashings for Ro-Ro ships
【24h】

Investigations of vehicle securing without lashings for Ro-Ro ships

机译:滚装船无绑扎的车辆固定研究

获取原文
获取原文并翻译 | 示例
           

摘要

To reduce the area on deck occupied by each car and the labour and time required for lashing and unlashing cars, it has been proposed by the author that in some conditions, cars on decks could be transported without lashing. To evaluate cargo securing based on this "lashing-free" concept, computational code was developed to calculate the vehicle-deck interactions for various ship motions. The code was structured by incorporating a vehicle model into a piece of ship motion calculation code. A series of time-domain simulations were conducted to evaluate vehicle securing. It was found that for a target ship consisting of a 6000-unit Ro-Ro vessel, vehicle securing is mainly influenced by the ship's rolling motions and is highly dependent on the wave height and loading conditions. It was suggested from the analysis that vehicles could be secured without being lashed in a large area of the ship in specific weather conditions and on some routes with less adverse sea states. However, it is still suggested that conventional lashing holes should be constructed on the deck because in severe sea states the cars will still need to be lashed.
机译:为了减少每辆轿厢占用的甲板面积以及绑扎和解绑轿厢所需的劳力和时间,作者建议在某些情况下可以在不绑扎的情况下运输甲板上的轿厢。为了评估基于这种“无绑扎”概念的货物固定,开发了计算代码来计算各种船舶运动的车—甲板相互作用。该代码是通过将车辆模型合并到一条船舶运动计算代码中而构成的。进行了一系列时域仿真,以评估车辆的安全性。结果发现,对于由6000单位滚装船组成的目标船,车辆的固定主要受船舶的侧倾运动影响,并且高度取决于波浪高度和载荷条件。从分析中建议,在特定天气条件下以及在某些不利海况较小的航线上,可以在大面积船舶上绑扎车辆而无需绑扎。但是,仍然建议在甲板上设置传统的绑扎孔,因为在严酷的海况下,仍然需要绑扎汽车。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号