首页> 外文期刊>Journal of intelligent material systems and structures >A new electroactive polymer based on carbon nanotubes and carbon grease as compliant electrodes for electroactive actuators
【24h】

A new electroactive polymer based on carbon nanotubes and carbon grease as compliant electrodes for electroactive actuators

机译:一种基于碳纳米管和碳脂的新型电活性聚合物,作为电致动器的顺应性电极

获取原文
获取原文并翻译 | 示例

摘要

In this article, the novel type of dielectric elastomer made of polydimethylsiloxane, multi-walled carbon nanotubes, and carbon grease is presented. The aim of the study was the development of compliant electrodes with ability for large deformation under applied voltage. The largest deformation of 47% was obtained for electrodes made of 2wt% of multi-walled carbon nanotubes and 20wt% of carbon grease. Electrical conductivity achieved for this material was 4.8S/m. Good dispersion of conductive fillers within silicone matrix was obtained by calendaring technique. It was found that electrical percolation threshold for the compound was below 0.05wt%. The structure of the material and its mechanical properties were determined. It was described that both properties, electrical conductivity and stiffness of the nanocomposite, have a significant influence on the extent of the electrode deformation. Two actuator designs are presented as the examples of application of developed material.
机译:在本文中,将介绍由聚二甲基硅氧烷,多壁碳纳米管和碳脂制成的新型介电弹性体。该研究的目的是开发在施加电压下具有大变形能力的柔性电极。对于由2wt%的多壁碳纳米管和20wt%的碳脂制成的电极,最大变形为47%。该材料获得的电导率为4.8S / m。通过压延技术获得了导电填料在硅树脂基质中的良好分散。发现该化合物的电渗透阈值低于0.05wt%。确定了材料的结构及其机械性能。据描述,纳米复合材料的性质,电导率和刚度都对电极变形的程度具有显着影响。提出了两种执行器设计,作为开发材料的应用示例。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号