首页> 外文期刊>Journal of Engineering for Gas Turbines and Power >Low Frequency Distortion in Civil Aero-engine Intake
【24h】

Low Frequency Distortion in Civil Aero-engine Intake

机译:民用航空发动机进气中的低频失真

获取原文
获取原文并翻译 | 示例

摘要

The main role of the intake is to provide a sufficient mass flow to the engine face and a sufficient flow homogeneity to the fan. Intake-fan interaction off design represents a critical issue in the design process because intake lines are set very early during the aircraft optimization. The offdesign operation of an aero-engine, strictly related to the intake flow field, can be mainly related to two different conditions. When the plane is in near ground position, vorticity can be ingested by the fan due to crosswind incidence. During the flight, distortions occur due to incidence. In these conditions, the windward lip is subjected to high acceleration followed by strong adverse pressure gradients, high streamline curvature, and cohabitation of incompressible and transonic flow around the lip. All these features increase the risk of lip stall in flight at incidence or in crosswind near ground operation and increase the level of forcing seen by the fan blades because of the interaction with nonuniform flow from the intake. This work deals with the study of two sources of distortions: ground vortex ingestion and flight at high incidence conditions. A test case representative of a current installation clearance from the ground has been investigated and the experimental data available in open literature validated the computational fluid dynamics (CFD) calculations. An intake, representative of a realistic civil aero-engine configuration flying at high incidence, has been investigated in powered and aspirated configurations. Distortion distributions have been characterized in terms of total loss distributions in space and in time. The beneficial effect of the presence of fan in terms of distortion control has been demonstrated. The mutual effect between fan and incoming distortion from the intake has been assessed in terms of modal force and distortion control. CFD has been validated by means of comparisons between numerical results and experimental data which have been provided. Waves predicted by CFD have been compared with an actuator disk approach prediction. The linear behavior of the lower disturbance frequency coming from distortion and the waves reflected by the fan has been demonstrated.
机译:进气口的主要作用是为发动机表面提供足够的质量流量,并为风扇提供足够的流量均匀性。设计中的进气风扇相互作用是设计过程中的关键问题,因为进气线是在飞机优化过程中很早就设置好的。严格与进气流场相关的航空发动机的非设计运行可能主要与两种不同情况有关。当飞机处于接近地面的位置时,由于侧风的入射,风扇可能会吸收涡流。在飞行过程中,由于入射而发生变形。在这些情况下,迎风唇承受较高的加速度,然后产生强烈的不利压力梯度,较高的流线曲率以及唇周围不可压缩和跨音速流的共存。所有这些特征都增加了在进气口或侧风近地面运行时在飞行中唇部失速的风险,并由于与进气口不均匀流动的相互作用而增加了风扇叶片所看到的强迫水平。这项工作涉及两个畸变源的研究:地面涡流的摄入和高发生条件下的飞行。已经研究了代表当前与地面的电气间隙的测试用例,公开文献中提供的实验数据验证了计算流体力学(CFD)的计算。在动力和吸气配置下,已经对进气口进行了研究,该进气口代表了现实的民用航空发动机配置,高空飞行。失真分布的特征在于空间和时间上的总损耗分布。已经证明了风扇的存在对变形控制的有益作用。通过模态力和变形控制,评估了风扇与进气口产生的变形之间的相互影响。 CFD已通过比较数值结果和提供的实验数据进行了验证。通过CFD预测的波已与执行器圆盘进近预测进行了比较。已经证明了失真引起的较低干扰频率和风扇反射波的线性行为。

著录项

  • 来源
    《Journal of Engineering for Gas Turbines and Power》 |2017年第4期|041203.1-041203.12|共12页
  • 作者单位

    Centre of Vibration Engineering,Department of Mechanical Engineering,Imperial College London,London SW7 2BX, UK;

    Centre of Vibration Engineering,Department of Mechanical Engineering,Imperial College London,London SW7 2BX, UK;

    Centre of Vibration Engineering,Department of Mechanical Engineering,Imperial College London,London SW7 2BX, UK;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号