...
首页> 外文期刊>Journal of Electronic Materials >Analysis of Crosstalk in HgCdTe p-on-n Heterojunction Photovoltaic Infrared Sensing Arrays
【24h】

Analysis of Crosstalk in HgCdTe p-on-n Heterojunction Photovoltaic Infrared Sensing Arrays

机译:HgCdTe p-on-n异质结光伏红外传感阵列中的串扰分析

获取原文
获取原文并翻译 | 示例
           

摘要

In this paper, an experimental and theoretical study is carried out of crosstalk between nearest-neighbor devices within a backside-illuminated linear HgCdTe photovoltaic infrared sensing array. The dominant form of crosstalk that occurs in high performance photovoltaic arrays is associated with photogenerated minority carriers that diffuse laterally between adjacent devices within the array. To measure crosstalk, a scanning laser microscope is used to obtain a spatial map of spot-scan photoresponse at a temperature of 80K for individual p-on-n photovoltaic devices within the linear array. These experimental results are compared to calculations performed on a commercial two-dimensional device simulation package. The crosstalk measurements and calculations presented in this paper include results on mid-wavelength infrared planar device structures, as well as long-wavelength infrared mesa-isolated devices, which give measured crosstalk values of 6.2 and 8.3/100, respectively. The results indicate that the device simulations are in good agreement with experimental results. Further simulations are carried out to determine the sensitivity of crosstalk to various material and device parameters such as epitaxial layer thickness (7 to 25 μm), illumination wavelength (1.047 to 11.0 μm), minority carrier diffusion length (8 to 90 μm), and diode pitch. It is found that the dominant feature influencing the value of crosstalk is the distance between the region of photogeneration and the collecting p-n junction.
机译:在本文中,对背面照明的线性HgCdTe光伏红外传感阵列中最邻近器件之间的串扰进行了实验和理论研究。高性能光伏阵列中发生的主要串扰形式与光生少数载流子相关,该载流子在阵列内的相邻设备之间横向扩散。为了测量串扰,对于线性阵列中的各个p-on-n光伏器件,使用扫描激光显微镜获得点扫描光响应在80K温度下的空间图。将这些实验结果与在商业二维设备仿真程序包上执行的计算进行比较。本文介绍的串扰测量和计算包括中波长红外平面器件结构以及长波长红外台面隔离器件的结果,其测得的串扰值分别为6.2和8.3 / 100。结果表明,器件仿真与实验结果吻合良好。进行进一步的仿真以确定串扰对各种材料和器件参数的敏感性,例如外延层厚度(7至25μm),照射波长(1.047至11.0μm),少数载流子扩散长度(8至90μm)和二极管间距。发现影响串扰值的主要特征是光生区域与收集的p-n结之间的距离。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号