首页> 外文期刊>Journal of Crystal Growth >Characterization of low-temperature-grown epitaxial BaPbO3 and Pb(Zr,Ti)O-3/BaPbO3 films on SrTiO3 substrates
【24h】

Characterization of low-temperature-grown epitaxial BaPbO3 and Pb(Zr,Ti)O-3/BaPbO3 films on SrTiO3 substrates

机译:SrTiO3衬底上低温生长的外延BaPbO3和Pb(Zr,Ti)O-3 / BaPbO3膜的表征

获取原文
获取原文并翻译 | 示例
       

摘要

The epitaxial BaPbO3 (BPO) and Pb(Zr,Ti)O-3 (PZT)/BPO films were grown on (001)- and (111)-oriented SrTiO3 (STO) substrates by RF-magnetron sputtering. With the self-template of BPO buffer layer (deposited at 650 degrees C), BPO main layer and PZT films can be epitaxially grown at temperatures as low as 350 and 475 degrees C, respectively. The (001)oriented BPO film showed a rougher surface and higher work function compared to the (222)-oriented film. The crystallinity and resistivity of BPO films were independent of their orientation. However, the crystallinity of PZT deposited afterward depends greatly on the orientation of BPO. The crystallinity of PZT deposited on BPO/STO(111) is significantly higher than that on BPO/STO(001). The remnant polarization, coercive field, dielectric constant, and resistivity of the PZT/BPO/STO(111) heterostructure were 35.54 mu C/cm(2), 102.67 kV/cm, 242, and 1.1-1.6 x 10(11) Omega cm, respectively, which are much better than those of the PZT/BPO/STO(001) heterostructures. (c) 2005 Elsevier B.V. All rights reserved.
机译:外延BaPbO3(BPO)和Pb(Zr,Ti)O-3(PZT)/ BPO膜通过射频磁控溅射在(001)和(111)取向的SrTiO3(STO)衬底上生长。利用BPO缓冲层(沉积在650摄氏度)的自模板,可以分别在低至350摄氏度和475摄氏度的温度下外延生长BPO主层和PZT膜。与(222)取向的薄膜相比,(001)取向的BPO薄膜显示出更粗糙的表面和更高的功函。 BPO膜的结晶度和电阻率与它们的取向无关。但是,随后沉积的PZT的结晶度在很大程度上取决于BPO的取向。沉积在BPO / STO(111)上的PZT的结晶度明显高于在BPO / STO(001)上的结晶度。 PZT / BPO / STO(111)异质结构的残余极化,矫顽场,介电常数和电阻率分别为35.54μC / cm(2),102.67 kV / cm,242和1.1-1.6 x 10(11)Ω ,分别比PZT / BPO / STO(001)异质结构好得多。 (c)2005 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号