...
首页> 外文期刊>Japanese Journal of Applied Physics. Part 1, Regular Papers, Brief Communications & Review Papers >Fabrication of Two-Dimensional Photonic Crystal Slab Point-Defect Cavity Employing Local Three-Dimensional Structures
【24h】

Fabrication of Two-Dimensional Photonic Crystal Slab Point-Defect Cavity Employing Local Three-Dimensional Structures

机译:利用局部三维结构制作二维光子晶体平板点缺陷腔

获取原文
获取原文并翻译 | 示例
           

摘要

The two-dimensional photonic crystal cavities employing local three-dimensional structures are investigated. Donor-type cavities with small and shallow holes are examined as examples of cavities with a local three-dimensional structure. It is shown that both the far-field and near-field patterns of the cavities can be controlled by the addition of small and shallow holes. The fabrication of such structures using a focused ion beam is proposed and investigated. Residual gallium ions, used in fabrication with a focused ion beam, lead to optical absorption; these gallium ions can be removed by heat treatment at 800℃. The near-field pattern of a fabricated three-dimensional cavity is measured, and is shown to be consistent with a theoretical analysis.
机译:研究了采用局部三维结构的二维光子晶体腔。研究具有小孔和浅孔的供体型腔,作为具有局部三维结构的腔的示例。结果表明,腔的远场和近场模式均可通过增加小而浅的孔来控制。提出并研究了使用聚焦离子束的这种结构的制造。与聚焦离子束一起制造时使用的残留镓离子会导致光吸收;这些镓离子可以通过800℃的热处理除去。测量了制造的三维腔的近场图案,并显示与理论分析一致。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号