首页> 外文期刊>International Journal of Heat and Mass Transfer >Heat transfer during condensing droplet coalescence
【24h】

Heat transfer during condensing droplet coalescence

机译:冷凝液滴聚结过程中的热传递

获取原文
获取原文并翻译 | 示例
           

摘要

Dropwise condensation can yield heat fluxes up to an order of magnitude higher than filmwise condensation. Coalescence is the primary mode of growth for condensing droplets above a small threshold size (e.g., radius r 2 mu m for water at 1 atm), but no prior studies have quantitatively assessed heat transfer during coalescence. Previous models of dropwise condensation have generally described coalescence as an instantaneous event, with a step reduction in heat transfer rate. However, coalescence and recovery of a quasi-steady droplet temperature profile requires a finite time, during which the direct droplet condensation heat transfer rate gradually decays. Additionally, during this period, the droplet may oscillate, repeatedly clearing the surrounding surface and resulting in high overall heat fluxes. This study employs Volume-of-Fluid (VOF) simulations to quantitatively assess these two transient heat transfer processes during droplet coalescence. It is shown that the direct mechanism of gradual heat transfer decay can be represented by a decaying exponential function with a time constant tau. Simulations are performed to determine tau(r(1), Rt) for (1 mu m = r(1) 25 mu m; 1 = Rt = 4) where r(1) is the radius of the smaller droplet and Rt is the radius ratio between the two merging droplets. For water at atmospheric pressure this spans the range of droplet sizes through which most of the heat transfer occurs on a surface (80%). A simple correlation is proposed for tau(r(1), Rt) for the studied droplet size range, fluid properties, and surface conditions. These simulations are also employed to determine the order of magnitude of heat transfer enhancement due to repeated clearing of the surrounding surface as droplets coalesce. Findings can inform improved models of dropwise condensation that more accurately predict transient heat transfer during coalescence events. (C) 2018 Elsevier Ltd. All rights reserved.
机译:逐滴冷凝产生的热通量比薄膜冷凝产生的热通量高一个数量级。凝聚是冷凝小阈值以上大小的液滴(例如,半径为1 atm的水的半径r> 2微米)时冷凝的主要生长方式,但是以前没有研究定量评估凝聚期间的传热。以前的逐滴冷凝模型通常将聚结描述为瞬时事件,传热速率逐步降低。但是,准稳态液滴温度曲线的合并和恢复需要有限的时间,在此期间,直接的液滴冷凝传热速率逐渐降低。此外,在此期间,液滴可能会振荡,反复清除周围的表面并导致较高的总热通量。这项研究采用流体体积(VOF)模拟来定量评估液滴聚结期间的这两个瞬态传热过程。结果表明,逐步传热衰减的直接机理可以用具有时间常数tau的衰减指数函数来表示。进行仿真以确定(1μm<= r(1)25μm; 1 <= Rt <= 4)的tau(r(1),Rt)其中r(1)是较小液滴的半径, Rt是两个合并液滴之间的半径比。对于大气压下的水,这会跨越液滴大小的范围,通过该液滴大小,大部分热传递都会发生在表面上(80%)。针对研究的液滴尺寸范围,流体性质和表面条件,提出了tau(r(1),Rt)的简单相关性。这些模拟还用于确定由于液滴聚结而反复清除周围表面而引起的传热增强量级。这些发现可以为改进的逐滴冷凝模型提供信息,该模型可以更准确地预测聚结事件期间的瞬态热传递。 (C)2018 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号