首页> 外文期刊>Instrumentation and Measurement, IEEE Transactions on >A Depth From Defocus Measurement System Using a Liquid Lens Objective for Extended Depth Range
【24h】

A Depth From Defocus Measurement System Using a Liquid Lens Objective for Extended Depth Range

机译:使用液体透镜物镜的散焦测量系统的深度,可扩展深度范围

获取原文
获取原文并翻译 | 示例

摘要

A novel depth from defocus (DFD) measurement system is presented, where the extension of the measurement range is performed using an emergent technology based on liquid lenses. A suitable set of different focal lengths, obtained by properly changing the liquid lens supply voltage, provides multiple camera settings without duplicating the system elements or using moving parts. A simple and compact setup, with a single camera/illuminator coaxial assembly, is obtained. The measurement is based on an active DFD technique using modulation measurement profilometry for the estimation of the contrast at each image point as a function of the depth range. Two different measurement methods are proposed, both based on a combination of multiple contrast curves, each derived at a specific focal length. In the first method (intensity contrast method), the depth information is recovered directly from the contrast curves, whereas in the second (differential contrast method), the depth is measured using contrast curve pairs. We obtained a measurement σ0 of 0.55 mm over a depth range of 60 mm with the intensity contrast method (0.92% of the total range) and an σ0 of 0.76 mm over a depth range of 135 mm with the differential contrast method (0.56% of the total range). Thus, the intensity contrast method is within the state-of-the-art DFD systems, whereas the differential contrast method allows, σ0 being almost equal, a remarkable extension of the depth range.
机译:提出了一种新颖的离焦深度(DFD)测量系统,其中使用基于液体透镜的新兴技术来扩展测量范围。通过适当地改变液体镜头电源电压获得的一组合适的不同焦距,可以提供多种相机设置,而无需复制系统元件或使用移动部件。使用单个相机/照明器同轴组件即可获得简单而紧凑的设置。该测量基于使用调制测量轮廓仪的有源DFD技术,用于根据深度范围估算每个图像点的对比度。提出了两种不同的测量方法,它们都是基于多个对比度曲线的组合,每种曲线都是在特定焦距下得出的。在第一种方法(强度对比方法)中,直接从对比曲线中恢复深度信息,而在第二种方法(微分对比方法)中,使用对比曲线对测量深度。我们使用强度对比法(总范围的0.92%)在60 mm深度范围内获得的测量值σ0为0.55 mm(占总范围的0.92%),而使用差分对比法(135%的情况下获得135mm深度范围内的测量值σ0为0.76 mm)总范围)。因此,强度对比方法在最先进的DFD系统中,而差分对比方法允许σ0几乎相等,从而大大扩展了深度范围。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号