...
首页> 外文期刊>IEEE Transactions on Vehicular Technology >A Novel Local Motion Planning Framework for Autonomous Vehicles Based on Resistance Network and Model Predictive Control
【24h】

A Novel Local Motion Planning Framework for Autonomous Vehicles Based on Resistance Network and Model Predictive Control

机译:基于阻力网络和模型预测控制的自动驾驶汽车局部运动计划框架

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

This paper presents a novel local motion planning framework in a hierarchical manner for autonomous vehicles to follow a trajectory and agilely avoid obstacles. In the upper layer, a new path-planning method based on the resistance network is applied to plan behaviors (e.g. lane keeping or changing), where the human-like factors can be included to simulate different driver styles, such as the aggressive, moderate, and conservative. The planned results (i.e. the lane-change command and the local planned path) will guide the lower-layer planner to decide the local motion. In the lower layer, for the sake of simplicity and alleviation of the computational burden, two separate model predictive controllers (MPC) based on a point-mass kinematic model are utilized for both longitudinal and lateral motion planning. Finally, a super-twisting sliding mode controller (STSMC) based motion tracker is designed to show the feasibility of the proposed decoupled planning method and decide the desired control actions of autonomous vehicles. Several scenarios are defined to comprehensively test and demonstrate the effectiveness and the real-time applicability of the new motion-planning framework. The results show that the proposed method performs very well in the planning and tracking process and takes less than 25 ms for the whole planning process, which can be easily implemented in real-world applications.
机译:本文以分层的方式提出了一种新颖的局部运动计划框架,以使自动驾驶汽车能够遵循轨迹并敏捷地避开障碍物。在上层,基于阻力网络的新路径规划方法被用于规划行为(例如,保持或改变车道),其中可以包含类人因素来模拟不同的驾驶员风格,例如激进,适度和保守。计划的结果(即换道命令和本地计划的路径)将指导下层计划者确定本地运动。在下层,为了简化和减轻计算负担,将基于点质量运动模型的两个单独的模型预测控制器(MPC)用于纵向和横向运动规划。最后,设计了基于超扭曲滑模控制器(STSMC)的运动跟踪器,以展示所提出的解耦规划方法的可行性并决定自动驾驶汽车的所需控制动作。定义了几种方案,以全面测试和演示新运动计划框架的有效性和实时适用性。结果表明,该方法在计划和跟踪过程中表现良好,整个计划过程不到25 ms,可以在实际应用中轻松实现。

著录项

  • 来源
    《IEEE Transactions on Vehicular Technology》 |2020年第1期|55-66|共12页
  • 作者

  • 作者单位

    Jilin Univ State Key Lab Automot Simulat & Control Changchun 130025 Peoples R China|Univ Waterloo Dept Mech & Mechatron Engn Waterloo ON N2L 3G1 Canada;

    Univ Waterloo Dept Mech & Mechatron Engn Waterloo ON N2L 3G1 Canada;

    Jilin Univ State Key Lab Automot Simulat & Control Changchun 130025 Peoples R China;

    Univ Waterloo Dept Mech & Mechatron Engn Waterloo ON N2L 3G1 Canada|Chongqing Univ Sch Automot Engn Chongqing 400044 Peoples R China;

    Univ Waterloo Dept Mech & Mechatron Engn Waterloo ON N2L 3G1 Canada|Beijing Inst Technol Sch Mech Engn Beijing 100081 Peoples R China;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Autonomous vehicle; motion planning; resistance network; model predictive control; super-twisting sliding mode motion tracker;

    机译:自动驾驶汽车;运动计划;抵抗网络;模型预测控制;超扭曲滑模运动跟踪器;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号