首页> 外文期刊>IEEE Transactions on Robotics >Jacobian-Based Iterative Method for Magnetic Localization in Robotic Capsule Endoscopy
【24h】

Jacobian-Based Iterative Method for Magnetic Localization in Robotic Capsule Endoscopy

机译:基于Jacobian的机器人胶囊内窥镜中磁定位的迭代方法

获取原文
获取原文并翻译 | 示例

摘要

The purpose of this study is to validate a Jacobian-based iterative method for real-time localization of magnetically controlled endoscopic capsules. The proposed approach applies finite-element solutions to the magnetic field problem and least-squares interpolations to obtain closed-form and fast estimates of the magnetic field. By defining a closed-form expression for the Jacobian of the magnetic field relative to changes in the capsule pose, we are able to obtain an iterative localization at a faster computational time when compared with prior works, without suffering from the inaccuracies stemming from dipole assumptions. This new algorithm can be used in conjunction with an absolute localization technique that provides initialization values at a slower refresh rate. The proposed approach was assessed via simulation and experimental trials, adopting a wireless capsule equipped with a permanent magnet, six magnetic field sensors, and an inertial measurement unit. The overall refresh rate, including sensor data acquisition and wireless communication was 7 ms, thus enabling closed-loop control strategies for magnetic manipulation running faster than 100 Hz. The average localization error, expressed in cylindrical coordinates was below 7 mm in both the radial and axial components and 5 in the azimuthal component. The average error for the capsule orientation angles, obtained by fusing gyroscope and inclinometer measurements, was below 5.
机译:这项研究的目的是验证磁控内窥镜胶囊实时定位的基于Jacobian的迭代方法。所提出的方法将有限元解决方案应用于磁场问题和最小二乘插值,以获得磁场的闭合形式和快速估计。通过为磁场的雅可比关系定义相对于胶囊姿态变化的闭合形式的表达式,与以前的工作相比,我们能够以更快的计算时间获得迭代定位,而不会遭受偶极子假设引起的误差。该新算法可与绝对定位技术结合使用,该技术以较低的刷新率提供初始化值。通过模拟和实验试验对提议的方法进行了评估,采用了配备有永磁体,六个磁场传感器和惯性测量单元的无线胶囊。包括传感器数据采集和无线通信在内的总刷新速率为7 ms,从而使闭环控制策略能够以高于100 Hz的速度运行于电磁操作中。径向和轴向分量均以圆柱坐标表示,平均定位误差在7 mm以下,方位角分量在5以下。通过融合陀螺仪和测斜仪测量获得的胶囊取向角的平均误差低于5。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号