Wide Speed Range Noise and Vibration Mitigation in Switched Reluctance Machines With Stator Pole Bridges

摘要

Noise, vibration, and harshness (NVH) issue in switched reluctance machines (SRMs), originating from their doubly salient structure and unique principle of operation, is addressed in this work by proposing a structural design modification in the stator, which increases stiffness to mass ratio of the structure. A 24-slot 16-pole (24s/16p) SRM designed with the aim of automotive application is studied here for the NVH optimization, at different target operating points, using stator pole bridges. Stator pole bridges link consecutive stator teeth to provide additional stiffness to the stator structure. Average torque reduction due to flux shorting in stator pole bridges is tackled by proposing a low-permeability material, with considerable stiffness, which has not yet seen its' application in SRM NVH domain. Multiphysics aspects of stator pole bridge design encompassing electromagnetic radial force, mechanical stress, steady-state temperature distribution, and acoustic noise analyses are presented in this article. Possible manufacturing issues are considered during the design phase and appropriate measures are implemented to facilitate easier construction of two 100-kW prototypes. The final design with stator pole bridges and a baseline design without any stator pole bridges are prototyped, after rigorous multiphysics optimization, for extensive testing. Experimental results verify simulation outputs and report a maximum noise reduction of 12.52 dBA in the stator pole bridge model compared to the baseline SRM.