首页> 外文期刊>IEEE transactions on circuits and systems . I , Regular papers >Design and Analysis of Wide Frequency-Tuning-Range CMOS 60 GHz VCO by Switching Inductor Loaded Transformer
【24h】

Design and Analysis of Wide Frequency-Tuning-Range CMOS 60 GHz VCO by Switching Inductor Loaded Transformer

机译:开关电感负载变压器的宽频范围CMOS 60 GHz VCO的设计与分析

获取原文
获取原文并翻译 | 示例

摘要

To provide wide frequency tuning range (FTR) with compact implementation area, a new inductive tuning method is introduced in this paper for CMOS 60 GHz voltage controlled oscillator (VCO). The inductive tuning is based on a switching inductor-loaded transformer by configuring different current return-paths in the secondary coil of the transformer. Different from previous inductive tuning methods, the proposed VCO topology can achieve wide FTR for multiple sub-bands at 60 GHz within compact area by only one transformer. Two 60 GHz VCOs are demonstrated in 65 nm CMOS with design targets for the maximum FTR and the balanced phase noise in each sub-band, respectively. As measured by experiments, the first VCO (asymmetric) achieves a wide FTR of 25.8% from 51.9 to 67.3 GHz with phase noise variation of $pm$8.2 dB ($-$90.2 to $-$106.7 dBc/Hz at 10 MHz offset) in all sub-bands; and the second VCO (symmetric) realizes a low phase noise variation of $pm$ 2.5 dB ($-$ 105.9 to $-$ 110.8 dBc/Hz at 10 MHz offset) in all sub-bands with a FTR of 14.2% from 57.0 GHz to 65.5 GHz.
机译:为了在紧凑的实现范围内提供宽频率调谐范围(FTR),本文针对CMOS 60 GHz压控振荡器(VCO)引入了一种新的电感调谐方法。通过在变压器的次级线圈中配置不同的电流返回路径,电感式调谐基于负载开关电感器的变压器。与以前的电感调谐方法不同,本文提出的VCO拓扑结构仅需一个变压器即可在紧凑的区域内实现60 GHz多个子带的宽FTR。在65 nm CMOS中演示了两个60 GHz VCO,其设计目标分别是每个子带的最大FTR和平衡的相位噪声。根据实验测量,第一个VCO(不对称)在51.9 GHz至67.3 GHz范围内实现了25.8%的宽FTR,相位噪声变化为$ pm $ 8.2 dB(在10 MHz偏移时为$-$ 90.2至$-$ 106.7 dBc / Hz)子带第二个VCO(对称)在所有子带中实现了$ pm $ 2.5 dB($-$ 105.9到$-$ 110.8 dBc / Hz,在10 MHz偏移下)的低相位噪声变化,FTR从57.0为14.2% GHz至65.5 GHz。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号