首页> 外文期刊>Fuel >Valorization of food waste: Extraction of cellulose, lignin and their application in energy use and water treatment
【24h】

Valorization of food waste: Extraction of cellulose, lignin and their application in energy use and water treatment

机译:食品废物的储价:提取纤维素,木质素及其在能量使用和水处理中的应用

获取原文
获取原文并翻译 | 示例
           

摘要

The study focuses on the isolation of the two important macromolecules of plant, lignin, and cellulose microcrystals (CMC) from agro-waste (peanut shell) and evaluates their potential application in biofuel production and wastewater treatment. The extraction of CMC was a two-step pretreatment process carried out by utilizing Sodium hydroxide followed by bleaching with Sodium Hypochlorite. The result showed that about 0.39 g/g of cellulose (dry wt%) was extracted from peanut shell waste. Scanning electron microscopy, Fourier transform infrared spectroscopy and X-ray diffraction were considered for the characterization of cellulose and lignin. Also, besides, the saccharification and fermentation process was optimized. The maximum yield of reducing sugar was 3.16 mg/ml at pH (7) utilizing cellulose (5gm). A significant difference in bioethanol yield was observed between Zymomonas mobilis and Saccharomyces cerevisiae producing (0.471 g/g) and (0.637 g/g) bioethanol respectively. The Kraft lignin (1.5 mg/ml) and cellulose left after bioethanol extraction (CLA) were further used for crystal violet dye removal. The maximum adsorption capacity shown by lignin was about 87.64% followed by cellulose with 69% removal, whereas for CLA the removal capacity was highest to 98.21%. The finding demonstrates the potential of extracted cellulose for bioethanol production, and the challenges of utilizing CLA and lignin in wastewater treatment.
机译:该研究侧重于从农业废物(花生壳)的两种重要大分子的植物,木质素和纤维素微晶(CMC)分离,并评估其在生物燃料生产和废水处理中的潜在应用。 CMC的提取是通过利用氢氧化钠进行的两步预处理方法,然后用次氯酸钠漂白。结果表明,从花生壳废物中提取约0.39g / g纤维素(干燥重量%)。考虑扫描电子显微镜,傅里叶变换红外光谱和X射线衍射用于纤维素和木质素的表征。此外,还优化了糖化和发酵过程。在pH(7)下,还原糖的最大收率在pH(7)下使用纤维素(5gm)。在Zymomonas Mobilis和Saccharomyces Cerevisiae分别观察到生物乙醇产量的显着差异,分别产生(0.471g / g)和(0.637g / g)生物甲醇。生物乙醇萃取(CLA)之后,牛皮纸(1.5mg / ml)和纤维素进一步用于除去晶体紫染料。木质素所示的最大吸附容量约为87.64%,然后纤维素去除69%,而CLA的去除能力最高至98.21%。该发现证明了生物乙醇生产中提取的纤维素的潜力,以及利用CLA和木质素在废水处理中的挑战。

著录项

  • 来源
    《Fuel》 |2020年第15期|118581.1-118581.9|共9页
  • 作者单位

    Jadavpur Univ Dept Chem Engn 188 Raja SC Mullick Rd Kolkata 700032 India;

    Vignans Fdn Sci Technol & Res VFSTR Dept Sci & Humanities Guntur 522213 Andhra Pradesh India;

    Jadavpur Univ Dept Chem Engn 188 Raja SC Mullick Rd Kolkata 700032 India;

    Jadavpur Univ Dept Chem Engn 188 Raja SC Mullick Rd Kolkata 700032 India;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Peanut shell; Lignocellulosic waste; Microcrystalline cellulose; Lignin; Dye;

    机译:花生壳;木质纤维素废物;微晶纤维素;木质素;染料;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号