首页> 外文期刊>Environmental Pollution >Identification and quantification of microplastic particles in drinking water treatment sludge as an integrative approach to determine microplastic abundance in a freshwater river
【24h】

Identification and quantification of microplastic particles in drinking water treatment sludge as an integrative approach to determine microplastic abundance in a freshwater river

机译:饮用水处理污泥中微塑性颗粒的鉴定及定量作为淡水河流测定微塑性丰度的一体化方法

获取原文
获取原文并翻译 | 示例
       

摘要

Microplastic (MP) has been detected ubiquitously in freshwater systems. Until now MP sampling, however, is predominantly based on short-term net or pumping and filtration systems which can only provide snapshots of MP abundance; especially in flowing water bodies. To improve representativeness in the determination of MP occurrences in these aquatic compartments, an integrative approach that covers larger water volumes for a longer period of time is required. In this regard, surface water supplied drinking water treatment plants (DWTPs) represent an opportunity. In DWTPs, suspended solids from thousands of cubic metres of raw water are continuously removed over several hours and enriched in coagulation/flocculation and filtration processes. Our hypothesis was that MP is also removed to a full extent, like suspended solids, and that an integrative approach for identification and quantification in raw water can be derived from the analysis of MP in the treatment sludge. To prove this hypothesis, treatment sludge from a riverside DWTP (Warnow river, North-Eastern Germany) was analysed for MP 50 mu m. A sample purification protocol overcoming potential matrix effects caused by coagulants and flocculants was developed and validated. MP was analysed using micro-Raman spectroscopy. MP occurrence determined for the Warnow river was compared with in situ reference sampling using an established pumping and filtration system at relatively stable flow conditions. As result, the number of MP particles derived from treatment sludge was extrapolated to 196 +/- 42 m(-3) for the Warnow river and is statistically insignificantly different from 233 +/- 36 m(-3) identified by conventional water sampling. In addition, the polymer distribution and particles shape indicated the validity of the integrative concept. Consequently, the determination of MP abundance for freshwater systems based on DWTP treatment sludge represents an adequate method to estimate MP concentrations in flowing waters in an integrative way.
机译:在淡水系统中普遍检测到微塑料(MP)。到目前为止,MP采样主要基于短期网或泵送和过滤系统,该系统只能提供MP丰度的快照;特别是在流动的水体中。为了提高这些水生舱的MP的确定中的代表性,需要一种覆盖较大时间较长时间的综合方法。在这方面,表面水供应饮用水处理厂(DWTPS)代表机会。在DWTPS中,在几个小时内连续去除来自数千个立方米的原水的悬浮固体,并富含凝血/絮凝和过滤过程。我们的假设是熔点也在全面地除去,如悬浮固体,并且可以从治疗污泥中的MP分析来源于原水中的鉴定和定量的一致方法。为了证明这一假设,分析了河边DWTP(德国东北河,德国东北河)的治疗污泥; 50亩。开发并验证了克服由凝结剂和絮凝剂引起的潜在基质效应的样品纯化方案。使用微拉曼光谱分析MP。使用在相对稳定的流动条件下使用建立的泵送和过滤系统,将针对Warnow River确定的MP发生。结果,衍生自处理污泥的MP颗粒的数量被推断为196 +/-22m(-3),用于常规水采样鉴定的233 +/- 36 m(-3)统计学上的统计学意义。此外,聚合物分布和颗粒形状表明了整合概念的有效性。因此,基于DWTP处理污泥的淡水系统MP丰度的测定代表了一种以完整方式估算流动水中的MP浓度的足够方法。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号