首页> 外文期刊>Engineering analysis with boundary elements >Post-buckling analysis of viscoelastic plates with fractional derivative models
【24h】

Post-buckling analysis of viscoelastic plates with fractional derivative models

机译:分数阶导数模型对粘弹性板的屈曲后分析

获取原文
获取原文并翻译 | 示例

摘要

The post-buckling response of thin plates made of linear viscoelastic materials is investigated. The employed viscoelastic material is described with fractional order time derivatives. The governing equations, which are derived by considering the equilibrium of the plate element, are three coupled nonlinear fractional partial evolution type differential equations in terms of three displacements. The nonlinearity is due to nonlinear kinematic relations based on the von Karman assumption. The solution is achieved using the analog equation method (AEM), which transforms the original equations into three uncoupled linear equations, namely a linear plate (biharmonic) equation for the transverse deflection and two linear membrane (Poisson's) equations for the inplane deformation under fictitious loads. The resulting initial value problem for the fictitious sources is a system of nonlinear fractional ordinary differential equations, which is solved using the numerical method developed recently by Katsikadelis for multi-term nonlinear fractional differential equations. The numerical examples not only demonstrate the efficiency and validate the accuracy of the solution procedure, but also give a better insight into this complicated but very interesting engineering plate problem
机译:研究了由线性粘弹性材料制成的薄板的屈曲后响应。用分数阶时间导数描述了所采用的粘弹性材料。通过考虑板单元的平衡而得出的控制方程是关于三个位移的三个耦合的非线性分数部分演化型微分方程。非线性是由于基于von Karman假设的非线性运动学关系。该解决方案是使用模拟方程法(AEM)实现的,该方法将原始方程转换为三个非耦合线性方程,即用于横向挠度的线性板(双谐波)方程和用于在虚拟状态下进行平面变形的两个线性膜(泊松)方程。负载。虚拟源所产生的初始值问题是一个非线性分数阶常微分方程组,该问题使用Katsikadelis最近为多项非线性分数阶微分方程开发的数值方法求解。数值示例不仅证明了求解程序的效率并验证了其准确性,而且还可以更好地洞察这个复杂但非常有趣的工程板问题

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号