首页> 外文期刊>Energy & fuels >Laser-Based Mass Spectrometric Assessment of Asphaltene Molecular Weight, Molecular Architecture, and Nanoaggregate Number
【24h】

Laser-Based Mass Spectrometric Assessment of Asphaltene Molecular Weight, Molecular Architecture, and Nanoaggregate Number

机译:基于激光的沥青质分子量,分子结构和纳米聚集体数量的质谱评估

获取原文
获取原文并翻译 | 示例
       

摘要

Unbiased analysis of asphaltene molecules by mass spectrometry requires that the three fundamental steps in mass spectrometry-volatilization, ionization, and mass analysis-are performed reliably and with nearly equivalent efficiency for nearly all of the diverse components in asphaltenes. Here, we examine these three processes and the overall analysis mechanism in two forms of laser-based mass spectrometry: laser desorption laser ionization mass spectrometry ((LMS)-M-2) and surface-assisted laser desorption/ionization mass spectrometry (SALDI). In (LMS)-M-2, volatilization occurs by laser desorption, which is a thermal process not selective for any particular molecular configuration; ionization occurs by single-photon ionization, which is a soft and universal method applicable to virtually all organic molecules and aggregates; and mass analysis occurs by time-of-flight mass spectrometry, which has a nearly constant sensitivity across a broad mass range. These factors suggest that I}MS should analyze asphaltenes with almost no bias, and (LMS)-M-2 measurements of model compounds and asphaltenes provide direct experimental evidence that fragmentation and multiple charging are minimized, while nearly all components of asphaltenes are detected as disaggregated molecules with nearly equivalent sensitivity. These experiments make (LMS)-M-2 perhaps the most thoroughly studied mass spectrometric method for measuring asphaltene molecules, and the results indicate that (LMS)-M-2 provides essentially unbiased detection of nearly all of the components in asphaltenes. Similarly, SALDI is demonstrated to be a complementary technique, in which asphaltenes are detected in the form of nanoaggregates. These observations add credibility to conclusions from (LMS)-M-2 and SALDI that petroleum asphaltenes typically have an average molecular weight in the range of 600-700 Da with an upper mass limit near 1500 Da, asphaltenes are dominated by the island geometry, asphaltenes form stable nanoaggregates containing approximately seven molecules, and asphaltenes of different mass are not separated in a reservoir by gravitational segregation. These results provide a stringent test and confirmation of many components of the Yen Mullins model, and they support the growing use of the Flory Huggins Zuo equation in the oilfield.
机译:通过质谱对沥青质分子进行无偏分析需要可靠地执行质谱中的三个基本步骤,即挥发,电离和质量分析,并且几乎对沥青质中的所有不同组分都具有等效的效率。在这里,我们以两种基于激光的质谱形式检查这三个过程以及整体分析机理:激光解吸激光电离质谱((LMS)-M-2)和表面辅助激光解吸/电离质谱(SALDI) 。在(LMS)-M-2中,挥发是通过激光解吸发生的,这是对任何特定分子构型都不具有选择性的热过程。电离是通过单光子电离发生的,这是一种软通用的方法,几乎​​适用于所有有机分子和聚集体。飞行时间质谱仪进行质量分析,它在较宽的质量范围内具有几乎恒定的灵敏度。这些因素表明,I} MS应该几乎没有偏倚地分析沥青质,并且(LMS)-M-2对模型化合物和沥青质的测量提供了直接的实验证据,表明片段化和多重充电被最小化,而沥青质的几乎所有成分都被检测为分解分子的灵敏度几乎相等。这些实验使(LMS)-M-2可能是研究沥青质分子的最深入研究的质谱方法,结果表明(LMS)-M-2提供了几乎公正的沥青质几乎所有成分的检测方法。同样,SALDI被证明是一种补充技术,其中以纳米聚集体的形式检测沥青质。这些观察结果为(LMS)-M-2和SALDI得出的结论增加了可信度,即石油沥青质的平均分子量通常在600-700 Da范围内,上限为1500 Da,沥青质以岛的几何形状为主,沥青质形成稳定的纳米聚集体,包含大约七个分子,并且质量不同的沥青质不会在重力作用下通过储层分离。这些结果对Yen Mullins模型的许多组成部分进行了严格的测试和确认,它们支持在油田中Flory Huggins Zuo方程的不断使用。

著录项

  • 来源
    《Energy & fuels》 |2015年第mayajuna期|2833-2842|共10页
  • 作者单位

    Schlumberger Doll Res Ctr, Cambridge, MA 02139 USA;

    Stanford Univ, Dept Chem, Stanford, CA 94350 USA;

    Schlumberger Doll Res Ctr, Cambridge, MA 02139 USA;

    Stanford Univ, Dept Chem, Stanford, CA 94350 USA;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);美国《生物学医学文摘》(MEDLINE);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

  • 入库时间 2022-08-18 00:40:19

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号