...
首页> 外文期刊>IEEE Transactions on Electron Devices >Generation of Laser Pulses in the Megahertz Range of Repetition Frequencies by Low-Voltage AlGaAs/GaAs Laser-Thyristors
【24h】

Generation of Laser Pulses in the Megahertz Range of Repetition Frequencies by Low-Voltage AlGaAs/GaAs Laser-Thyristors

机译:低压AlGaAs / GaAs激光晶闸管在兆赫兹重复频率范围内产生激光脉冲

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

The process of generation of a high-frequency train of laser pulses in laser-thyristors (LTs) based on AlGaAs/GaAs heterostructures with various optical activation efficiencies has been studied. It was found that the main factors affecting the frequency and peak power of the laser pulses are the charging current of the barrier capacitance of the collector p-n junction and the holding current. The charging current of the barrier capacitance determines the condition for an LT to pass to the uncontrollable turn-on mode. The holding current determines the condition for the transition of an LT to the sticking mode in the turned-on state. It was shown that the holding current reached a value of 0.2 mA for the LT heterostructure with high optical activation efficiency, which limited the maximum repetition frequency to 470 kHz at a peak power of 4 W. A decrease in the optical activation efficiency made it possible to raise the holding current to 100 mA, with the maximum repetition frequency reaching as a result 12 MHz at a peak power of 0.7 W. Lowering the repetition frequency to 8 MHz made it possible to raise the peak power to 3.2 W at a pulse width of 17 ns.
机译:研究了基于具有各种光学激活效率的AlGaAs / GaAs异质结构的激光晶闸管(LT)中的激光脉冲高频序列的生成过程。已经发现影响激光脉冲的频率和峰值功率的主要因素是集电极p-n结的势垒电容的充电电流和保持电流。势垒电容的充电电流确定了LT进入不可控制的导通模式的条件。保持电流确定了导通状态下LT过渡到粘贴模式的条件。结果表明,对于具有高光激活效率的LT异质结构,保持电流达到0.2 mA的值,这在4 W峰值功率下将最大重复频率限制为470 kHz。光激活效率的降低使它成为可能。将保持电流提高到100 mA,最大重复频率在峰值功率0.7 W时达到12 MHz。将重复频率降低到8 MHz使得在脉冲宽度下峰值功率可以提高到3.2 W 17 ns。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号