Influence of parameters of cap-lamination secondaries on performances in single-sided linear induction motors

摘要

The secondary is an important design factor of single-sided linear induction motors (SLIMs), as well as has influence on the cost and performance of SLIMs. In this study, the cap-lamination secondary is designed and relations of the secondary parameter and performance of SLIMs are calculated. First, the aluminium (Al) cap and lamination back iron of the cap-lamination secondary are designed and discussed. Then, improvements in performance caused by two potentially significant effects of the cap-lamination secondary, i.e. the thick cap edge and lamination, are identified. Second, a flat-solid secondary is applied and two SLIMs, which are the same primary and two different secondaries, are calculated by three-dimensional finite-element method. Eddy current densities in the Al and back iron plate, which are two parts of the secondary, are analysed. Owing to different transverse edge effects, variations of the air-gap flux density are calculated with different secondaries. Finally, the numerical results of the thrust, power factor, and efficiency are experimentally validated by measurements on test rig of SLIMs. It shows that the SLIM with cap-lamination secondary, which has higher performance, is affected greatly by the conductor structure of the secondary and the lamination of the iron back plate.