Response of base-isolated nuclear structures for design and beyond- design basis earthquake shaking

摘要

The American Society of Civil Engineers (ASCE) 43-05 presents two performance objectives for the design of nuclear structures, systems and components in nuclear facilities: (1)1% probability of unacceptable performance for 100% design basis earthquake (DBE) shaking and (2) 10% probability of unacceptable performance for 150% DBE shaking. To aid in the revision of the ASCE 4-98 procedures for the analysis and design of base-isolated nuclear power plants and meet the intent of ASCE 43-05, a series of nonlinear response-history analyses was performed to study the impact of the variability in both earthquake ground motion and mechanical properties of isolation systems on the seismic responses of base-isolated nuclear power plants. Computations were performed for three representative sites (rock and soil sites in the Central and Eastern United States and a rock site in the Western United States) and three types of isolators (lead rubber, Friction Pendulum and low-damping rubber bearings) using realistic mechanical properties for the isolators. Estimates were made of (1) the ratio of the 99th percentile (90th percentile) response of isolation systems computed using a distribution of spectral demands and distributions of isolator mechanical properties to the median response of isolation systems computed using best-estimate properties and 100% (150%) spectrum-compatible DBE ground motions; (2) the number of sets of three-component ground motions to be used for response-history analysis to develop a reliable estimate of the median response of isolation systems. The results of this study provide the technical basis for the revision of ASCE Standard 4-98.