...
首页> 外文期刊>Science and technology of advanced materials >Terminal cationization of poly( N -isopropylacrylamide) brush surfaces facilitates efficient thermoresponsive control of cell adhesion and detachment
【24h】

Terminal cationization of poly( N -isopropylacrylamide) brush surfaces facilitates efficient thermoresponsive control of cell adhesion and detachment

机译:聚(N-异丙基丙烯酰胺)刷表面的末端阳离子化有助于高效控制细胞粘附和脱离

获取原文

摘要

A variety of poly( N -isopropylacrylamide) (PIPAAm)-grafted surfaces have been reported for temperature-controlled cell adhesion/detachment. However, the surfaces reported to date need further improvement to achieve good outcomes for both cell adhesion and detachment, which are inherently contradictory behaviors. This study investigated the effects of terminal cationization and length of grafted PIPAAm chains on temperature-dependent cell behavior. PIPAAm brushes with three chain lengths were constructed on glass coverslips via surface-initiated reversible addition-fragmentation chain transfer (RAFT) polymerization. Terminal substitution of the grafted PIPAAm chains with either monocationic trimethylammonium or nonionic isopropyl moieties was performed through the reduction of terminal RAFT-related groups and subsequent thiol-ene reaction with the corresponding acrylamide derivatives. Although the thermoresponsive properties of the PIPAAm brush surfaces were scarcely affected by the terminal functional moiety, the zeta potentials of the cationized PIPAAm surfaces were higher than those of the nonionized ones, both below and above the phase transition temperature of PIPAAm (30°C). When bovine endothelial cells were cultured on each surface at 37°C, the number of adherent cells decreased with longer PIPAAm. Notably, cell adhesion on the cationized PIPAAm surfaces was higher than that on the nonionized surfaces. This terminal effect on cell adhesion gradually weakened with increasing PIPAAm length. In particular, long-chain PIPAAm brushes virtually showed cell repellency even at 37°C, regardless of the termini. Interestingly, moderately long-chain PIPAAm brushes promoted cell detachment at 20°C, with negligible terminal electrostatic interruption. Consequently, both cell adhesion and detachment were successfully improved by choosing an appropriate PIPAAm length with terminal cationization.
机译:已经报道了各种聚(N-异丙基丙烯酰胺)(PIPAAM) - 移植表面用于温度控制的电池粘附/脱离。然而,迄今为止报告的表面需要进一步改善,以实现细胞粘附和脱离的良好结果,这是具有固有的矛盾行为。本研究研究了终端阳离子化和嫁接琵琶链的长度对温度依赖性细胞行为的影响。具有三个链长度的PIPAAM刷在玻璃盖玻片上通过表面引发的可逆添加 - 碎片链转移(筏)聚合来构建。通过减少终端筏相关基团和随后与相应的丙烯酰胺衍生物的反应进行接枝吡吡铵或非离子异丙基部分的末端取代与单子系三甲基铵或非离子异丙基部分进行。虽然哌纸斑表面的热反应性质几乎没有受到末端功能部分的影响,但是阳离子化琵振表面的ζ电位高于非离子的Zeta电位,低于哌羚的相变温度(30°C) 。当在37℃的每个表面上培养牛内皮细胞时,粘附细胞的数量随着较长的皮纸而降低。值得注意的是,阳离子化琵琶表面上的细胞粘附高于非离子表面上的细胞粘附。这种终端对细胞粘附的影响随着增加的剥皮长度逐渐减弱。特别是,无论终端都如何,长链Pipaam刷即使在37°C时也明显显示了细胞排斥性。有趣的是,适度的长链Pipaam刷子在20℃下促进细胞脱离,终端静电中断可忽略不计。因此,通过选择具有终端阳离子化的适当的琵琶长度,成功地改善了细胞粘附和脱离。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号