首页> 外文期刊>Journal of NeuroEngineering Rehabilitation >Learning to walk with an adaptive gain proportional myoelectric controller for a robotic ankle exoskeleton
【24h】

Learning to walk with an adaptive gain proportional myoelectric controller for a robotic ankle exoskeleton

机译:学习使用自适应增益比例肌电控制器进行步行,以实现机器人踝关节外骨骼的行走

获取原文
           

摘要

Background Robotic ankle exoskeletons can provide assistance to users and reduce metabolic power during walking. Our research group has investigated the use of proportional myoelectric control for controlling robotic ankle exoskeletons. Previously, these controllers have relied on a constant gain to map user’s muscle activity to actuation control signals. A constant gain may act as a constraint on the user, so we designed a controller that dynamically adapts the gain to the user’s myoelectric amplitude. We hypothesized that an adaptive gain proportional myoelectric controller would reduce metabolic energy expenditure compared to walking with the ankle exoskeleton unpowered because users could choose their preferred control gain. Methods We tested eight healthy subjects walking with the adaptive gain proportional myoelectric controller with bilateral ankle exoskeletons. The adaptive gain was updated each stride such that on average the user’s peak muscle activity was mapped to maximal power output of the exoskeleton. All subjects participated in three identical training sessions where they walked on a treadmill for 50 minutes (30 minutes of which the exoskeleton was powered) at 1.2 ms -1 . We calculated and analyzed metabolic energy consumption, muscle recruitment, inverse kinematics, inverse dynamics, and exoskeleton mechanics. Results Using our controller, subjects achieved a metabolic reduction similar to that seen in previous work in about a third of the training time. The resulting controller gain was lower than that seen in previous work (β=1.50±0.14 versus a constant β=2). The adapted gain allowed users more total ankle joint power than that of unassisted walking, increasing ankle power in exchange for a decrease in hip power. Conclusions Our findings indicate that humans prefer to walk with greater ankle mechanical power output than their unassisted gait when provided with an ankle exoskeleton using an adaptive controller. This suggests that robotic assistance from an exoskeleton can allow humans to adopt gait patterns different from their normal choices for locomotion. In our specific experiment, subjects increased ankle power and decreased hip power to walk with a reduction in metabolic cost. Future exoskeleton devices that rely on proportional myolectric control are likely to demonstrate improved performance by including an adaptive gain.
机译:背景技术机器人的踝关节外骨骼可以为使用者提供帮助,并在步行过程中降低其代谢能力。我们的研究小组研究了比例肌电控制在控制机器人脚踝外骨骼中的应用。以前,这些控制器依靠恒定增益将用户的肌肉活动映射到致动控制信号。恒定的增益可能会对用户造成限制,因此我们设计了一种控制器,可以根据用户的肌电幅度动态调整增益。我们假设与没有动力的踝外骨骼行走相比,自适应增益比例肌电控制器将减少代谢能量消耗,因为用户可以选择自己喜欢的控制增益。方法我们测试了八名健康受试者,他们使用带有双侧踝外骨骼的自适应增益比例肌电控制器进行行走。自适应增益在每次跨步时都会更新,因此平均而言,用户的峰值肌肉活动会映射到外骨骼的最大功率输出。所有受试者都参加了三个相同的训练课程,他们在跑步机上以1.2 ms -1的速度走了50分钟(其中外骨骼通电了30分钟)。我们计算并分析了代谢能量消耗,肌肉募集,逆运动学,逆动力学和外骨骼力学。结果使用我们的控制器,受试者在大约三分之一的训练时间内实现了与先前工作相似的代谢减少。所得的控制器增益低于先前的工作(β= 1.50±0.14对恒定的β= 2)。调整后的增益使用户的踝关节总力量大于无助行走的总踝关节力量,从而增加了踝关节力量,从而降低了髋关节力量。结论我们的发现表明,当使用自适应控制器为脚踝提供外骨骼时,与无助步态相比,人类更喜欢以脚踝的机械动力输出行走。这表明外骨骼的机器人辅助可以使人类采用不同于正常运动方式的步态模式。在我们的特定实验中,受试者增加了脚踝力量,并降低了步行髋关节力量,同时降低了代谢成本。未来依赖比例分子控制的外骨骼设备可能会通过包含自适应增益来证明性能得到改善。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号