首页> 外文期刊>Journal of Korean Neurosurgical Society >Vertebroplasty Utilizing Percutaneous Vertebral Body Access (PVBA) Technique for Osteoporotic Vertebral Compression Fractures in the Middle Thoracic Vertebrae
【24h】

Vertebroplasty Utilizing Percutaneous Vertebral Body Access (PVBA) Technique for Osteoporotic Vertebral Compression Fractures in the Middle Thoracic Vertebrae

机译:利用经皮椎体入路(PVBA)技术进行椎体成形术治疗中胸椎骨的骨质疏松性椎体压缩性骨折。

获取原文
       

摘要

Objective Percutaneous approach to the middle thoracic vertebra through the transpedicular route for the patients with osteoporotic vertebral compression fractures is difficult due to the small size of the pedicle and parasagittally oriented vertebral body anatomy. The percutaneous vertebral body access (PVBA) technique utilizing the posterolateral extrapedicular approach avoids the pedicle and provides direct access to the vertebral body. The objective of this study is to evaluate the efficacy of the vertebroplasty utilizing PVBA technique for osteoporotic vertebral compression fractures in the middle thoracic vertebrae. Methods A retrospective review was done on 20 patients who underwent vertebroplasty utilizing PVBA technique performed for painful osteoporotic compression fracture in the middle thoracic vertebrae at 22 levels from May 2003 to June 2006. The average amount of the injected cement was 1.5-2.5ml. The postprocedural outcome was assessed using a visual analogue scale (VAS). Results The treated vertebrae were T5 (1 level), T6 (5 levels), T7 (7 levels), and T8 (9 levels). The compression rate and kyphotic angle were improved after procedure from 18%±13.4 to 16%±13.8 (p>0.05) and from 6.9°±6.7 to 6.6°±6.2 (p>0.05), respectively. Preprocedural VAS was 8.2±0.70 and was decreased to 2.1±1.02 (p Conclusion These results suggest that the complication rates are low and good results can be achieved with vertebroplasty utilizing PVBA technique for the osteoporotic vertebral compression fractures especially in the middle thoracic vertebrae.
机译:目的由于椎弓根的尺寸小且椎旁旁定向的椎体解剖结构,通过经椎弓根入路的经胸椎穿刺途径进入中胸椎是困难的。利用后外侧椎弓根入路的经皮椎体入路(PVBA)技术可避免椎弓根,并直接进入椎体。这项研究的目的是评估采用PVBA技术的椎体成形术对中胸椎的骨质疏松性椎体压缩性骨折的疗效。方法回顾性分析2003年5月至2006年6月,采用PVBA技术对22例中胸椎骨痛性骨质疏松性压迫性骨折行椎体成形术的患者,平均注入量为1.5-2.5ml。使用视觉模拟量表(VAS)评估术后结果。结果治疗椎骨为T5(1级),T6(5级),T7(7级)和T8(9级)。手术后的压缩率和后凸角分别从18%±13.4改善到16%±13.8(p> 0.05)和从6.9°±6.7改善到6.6°±6.2(p> 0.05)。术前VAS为8.2±0.70,降至2.1±1.02(p结论)这些结果表明,采用PVBA技术对椎体成形术进行椎体成形术,尤其是在胸椎中段,并发症发生率较低,可以取得良好的效果。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号