首页> 外文期刊>Transportation Research Procedia >Locating roadworks sites via detecting change in lateral positions of traffic signs measured relative to the ego-car
【24h】

Locating roadworks sites via detecting change in lateral positions of traffic signs measured relative to the ego-car

机译:通过检测相对于自我车测量的交通标志的横向位置变化来定位道路工地

获取原文
获取外文期刊封面目录资料

摘要

Roadworks can be hazardous for both road workers and road users. Even with state-of-the-art safety measures in place, serious accidents do happen there, particularly when drivers do not heed roadwork signs and speed limits. Crashes at roadworks that involve killed or seriously injured (KSI) casualties account for about 2% of all KSI crashes in developed countries, even though the roadworks are normally well-signaled and are also marked in quick-reaction road/traffic maps. These media provide several means for the drivers ? and for the on-board advanced driving assistance systems (ADAS) helping them ? to duly detect roadworks. In the paper, an approach based on statistical inference is presented for detecting roadwork zones. The approach takes into account the engineering regulations and practice concerning setting up temporary road configurations near and along roadworks. Such configurations often involve narrower traffic lanes and traffic signs installed closer to traffic. The approach detects change in ? among other type of collected data ? the lateral positions of the traffic signs measured relative to the ego-car along the road. In a practical implementation, the traffic sign detection and recognition, the lateral distance measurement and the data recording are carried out by some traffic sign recognition (TSR) system. The traffic sign data is seen as a realization of a marked Poisson process and the minimum description length (MDL) principle – set to work in the form of Page-Hinkley change detectors – is applied for detecting roadworks.
机译:道路工程对道路工人和道路使用者都可能有害。即使采取了最先进的安全措施,那里也确实发生了严重的事故,特别是当驾驶员不注意道路施工标志和限速时。在道路工程中,涉及死伤或重伤(KSI)伤亡的事故约占发达国家所有KSI事故的2%,尽管道路工程通常信号良好,并且在快速反应道路/交通地图中也有标明。这些媒体为驾驶员提供了几种方法?以及用于车载高级驾驶辅助系统(ADAS)的帮助吗?及时发现道路工程。在本文中,提出了一种基于统计推断的道路施工区域检测方法。该方法考虑了有关在道路工程附近和沿道路工程建立临时道路配置的工程法规和实践。这种配置通常涉及较窄的行车道和更靠近交通的交通标志。该方法可以检测出变化?除其他类型的收集数据之外?交通标志相对于沿道路的自我车的横向位置。在实际的实施中,交通标志的检测和识别,横向距离的测量以及数据的记录是通过一些交通标志识别(TSR)系统来进行的。交通标志数据被视为实现了明显的泊松过程,并且最小描述长度(MDL)原理(以Page-Hinkley变更检测器的形式工作)适用于道路工程检测。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号