Cohesive Zone Models (CZM) are widely used for the strength prediction of adhesive joints. This work studies the influence of different conditions used in CZM simulations to model a thin adhesive layer in single-lap joints (SLJ) submitted to a tensile loading, for an estimation of their influence on the strength prediction under diverse geometrical and material conditions. Adhesives ranging from brittle to highly ductile and overlap lengths ( L O ) between 12.5 and 50 mm were considered. Several damage initiation and growth criteria were tested. The analysis carried out in this work allowed to conclude that CZM is a powerful technique for strength prediction of bonded joints, provided that the modelling conditions are properly defined.
展开▼