...
首页> 外文期刊>IEICE Electronics Express >A D-band divide-by-6 injection-locked frequency divider with Lange-coupler feedback architecture in 0.13 ?μm SiGe HBT
【24h】

A D-band divide-by-6 injection-locked frequency divider with Lange-coupler feedback architecture in 0.13 ?μm SiGe HBT

机译:具有0.13μmSiGe HBT的具有兰格耦合器反馈架构的D波段6分频注入锁定分频器

获取原文
   

获取外文期刊封面封底 >>

       

摘要

A D-band divide-by-6 injection-locked frequency divider (ILFD) is presented. The basic mechanism of high division ratios frequency divider is investigated. The circuit employs a wideband microstrip Lange coupler, a microstrip delay line and a pair of Cascode transistors to form a feedback loop for enhanced divide-by-6 operation. The proposed ILFD is fabricated with chip size of 0.7 ?? 0.9 mm2 in a 0.13 ?μm SiGe HBT technology. The losses of WR-6 waveguide and 170-GHz probe in measurement setup are calibrated accurately by employing the open-short-load approach in a terminated two-port network. Through varying the operating voltage, the free-running oscillation frequency of the circuit can be changed, which results in an effective frequency-division locking range of 135 to 150.2 GHz while consuming 5.25 to 14.4 mW including the output buffer amplifier. A phase noise of a??121.58 dBc/Hz at 1 MHz offset is achieved at 150.2 GHz.
机译:提出了一种D波段6分频注入锁定分频器(ILFD)。研究了高分频比分频器的基本机理。该电路采用宽带微带兰格耦合器,微带延迟线和一对Cascode晶体管形成反馈环路,以增强6分频操作。提出的ILFD的芯片尺寸为0.7Ω。在0.13μmSiGe HBT技术中为0.9 mm2。通过在端接的两端口网络中采用开放-短负载方法,可以准确地校准测量设置中WR-6波导和170-GHz探头的损耗。通过改变工作电压,可以改变电路的自由振荡频率,从而导致有效的分频锁定范围为135至150.2 GHz,而包括输出缓冲放大器在内的功耗为5.25至14.4 mW。在150.2 GHz时,在1 MHz偏移处的相位噪声为a ?? 121.58 dBc / Hz。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号