首页> 外文期刊>African Journal of Food, Agriculture, Nutrition and Development >Size reduction of food commodities and food safety in some Accra markets
【24h】

Size reduction of food commodities and food safety in some Accra markets

机译:一些阿克拉市场的食品商品尺寸减小和食品安全

获取原文
获取外文期刊封面目录资料

摘要

The objective of this paper is to investigate the food safety and hygienic status after size reduction in some Accra markets, using questionnaire and bacterial samples to validate the questionnaire findings. The primary research was done in the Kaneshie, Makola and Nima markets in Accra. The work involved more than 55 milling machines in these different and affluent markets. The audit form used consisted of a number of questions for each of the 21 respondents chosen at random with a range ofone to three machines, some owning up to 5 machines. In addition to the audit,36 samples of tomatoes were taken before and after milling to assess their microbiological safety and the microbial total load by evaluating the platecount agar (PCA), and Violet Red Bile Glucose (VRBG) for the detection and enumeration of Enterobacteriaceae such as Escherichia coli indicating the presence of potential faecal contamination. All 36 samples from the three markets were relatively microbiologically contaminated. The contamination load increased with the milling time. After size reduction of the foods they came out of the machine more contaminated than they entered. Some foods are subjected to adulteration in the size reduction machine. The results of this study suggest that even though most of the foods are cooked before consumption it is necessary to put in place good manufacturing practice (GMP) which must be followed starting with Hazard Analysis and Critical Control Points (HACCP) principles. If this is not done, consumption of such products could lead to serious health hazards especially where they are not cooked enough to eliminate the microbial loads. Disinfection of the machine and the environment will be necessary after each milling session. The products to be milled should be of better microbial quality as well so that the milled product can be safe for consumption. The enforcing agencies and other stakeholders also have a big role to play in terms of awareness and education for the good of the consumer.
机译:本文的目的是调查一些阿克拉市场中减少尺寸后的食品安全性和卫生状况,使用问卷和细菌样本来验证问卷调查结果。初步研究是在阿克拉的Kaneshie,Makola和Nima市场进行的。这些工作涉及这些不同和富裕市场中的55多台铣床。所使用的审核表由随机选择的21名受访者中的每一个回答一系列问题组成,范围从1到3台机器,有些拥有5台机器。除审核外,在研磨前后还采集了36个西红柿样品,通过评估板数琼脂(PCA)和紫红色胆汁葡萄糖(VRBG)来检测和计数肠杆菌科细菌,评估其微生物学安全性和微生物总负荷。例如大肠杆菌,表明存在潜在的粪便污染。来自三个市场的所有36个样品均受到了微生物污染。污染负荷随研磨时间而增加。在减小食物尺寸之后,它们从机器中出来的污染要比进入时受到的污染更大。某些食物会在尺寸减小机中掺假。这项研究的结果表明,即使大多数食品在食用前都已煮熟,也有必要实施良好的生产规范(GMP),必须从危害分析和关键控制点(HACCP)原则开始遵循该规范。如果不这样做,食用此类产品可能会导致严重的健康危害,尤其是在未充分煮熟以消除微生物负荷的情况下。每次铣削后都必须对机器和环境进行消毒。待研磨的产品还应具有更好的微生物质量,以便可以安全食用。执法机构和其他利益相关者在提高意识和教育消费者利益方面也可以发挥重要作用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号