首页> 外文期刊>Advances in fuzzy systems >Fuzzy Sliding Mode Based Series Hybrid Active Power Filter for Power Quality Enhancement
【24h】

Fuzzy Sliding Mode Based Series Hybrid Active Power Filter for Power Quality Enhancement

机译:基于模糊滑模的串联混合有源电力滤波器,提高电能质量

获取原文

摘要

This paper contributes an innovative gating signal generation technique based on fuzzy sliding mode pulse width modulation (FSMPWM) with a Series Hybrid Active Power Filter (SEHAPF) for reducing the total harmonic distortion (THD). Hybrid filters are used for compensating reactive power on the load side and mitigate harmonics for the growth of power quality under variable source and load conditions in the utility system. The objective of the paper is to eradicate the various power quality (PQ) problems with development in power factor and reducing distortion in transmission and distribution line due to harmonics. With the implementation of FSMPWM of the proposed filter, the gating pulses are generated by implementing a Mamdani fuzzy rule with sliding surfaces. For producing a fixed pulse the presented method reduces the chattering reaction by controlling the narrow boundary coating on the sliding surface. The results of the projected technique are analyzed and compared with the traditional hysteresis band current controller (HCC). The overall proficiency and results are examined with the help of MATLAB/SIMULINK environment.
机译:本文为基于模糊滑模脉冲宽度调制(FSMPWM)和串联混合有源功率滤波器(SEHAPF)的创新型门控信号生成技术做出了贡献,以减少总谐波失真(THD)。混合滤波器用于补偿负载侧的无功功率,并在公用系统中在可变电源和负载条件下减轻谐波,以提高电能质量。本文的目的是消除功率因数发展带来的各种电能质量(PQ)问题,并减少谐波引起的输配电线路失真。通过所提出的滤波器的FSMPWM的实现,通过实现带有滑动表面的Mamdani模糊规则来生成选通脉冲。为了产生固定的脉冲,所提出的方法通过控制滑动表面上的窄边界涂层来减少颤动反应。分析了该投影技术的结果,并将其与传统的磁滞带电流控制器(HCC)进行了比较。在MATLAB / SIMULINK环境的帮助下检查了整体熟练程度和结果。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号