首页> 外文期刊>Computer Assisted Surgery >A comparison of registration errors with imageless computer navigation during MIS total knee arthroplasty versus standard incision total knee arthroplasty: a cadaveric study
【24h】

A comparison of registration errors with imageless computer navigation during MIS total knee arthroplasty versus standard incision total knee arthroplasty: a cadaveric study

机译:MIS全膝关节置换术与标准切口全膝关节置换术期间无图像计算机导航的配准错误比较:尸体研究

获取原文
           

摘要

Optimal component alignment in total knee arthroplasty has been associated with better functional outcome as well as improved implant longevity. The ability to align components optimally during minimally invasive (MIS) total knee replacement (TKR) has been a cause of concern. Computer navigation is a useful aid in achieving the desired alignment although it is limited by the error during the manual registration of landmarks. Our study aims to compare the registration process error between a standard and a MIS surgical approach. We hypothesized that performing the registration error via an MIS approach would increase the registration process error. Five fresh frozen lower limbs were routinely prepared and draped. The registration process was performed through an MIS approach. This was then extended to the standard approach and the registration was performed again. Two surgeons performed the registration process five times with each approach. Performing the registration process through the MIS approach was not associated with higher error compared to the standard approach in the alignment parameters of interest. This rejects our hypothesis. Image-free navigated MIS TKR does not appear to carry higher risk of component malalignment due to the registration process error. Navigation can be used during MIS TKR to improve alignment without reduced accuracy due to the approach.
机译:全膝关节置换术中的最佳组件对准与更好的功能结局以及改善的植入物寿命有关。在微创(MIS)全膝关节置换(TKR)期间最佳对齐组件的能力引起了人们的关注。尽管受地标手动注册过程中的错误限制,但计算机导航对实现所需的对齐方式很有帮助。我们的研究旨在比较标准手术方法和MIS手术方法之间的配准过程错误。我们假设通过MIS方法执行注册错误会增加注册过程错误。常规准备五个新鲜的冷冻下肢并披上。注册过程是通过MIS方法执行的。然后将其扩展到标准方法,并再次执行注册。每种方法由两名外科医生执行五次注册过程。与目标对准参数中的标准方法相比,通过MIS方法执行注册过程不会带来更高的误差。这拒绝了我们的假设。由于注册过程中的错误,无图像导航的MIS TKR似乎没有更高的组件错位风险。可以在MIS TKR期间使用导航来改善对齐,而不会由于该方法而降低准确性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号