...
首页> 外文期刊>BMC Musculoskeletal Disorders >Comparison of improved range of motion between cam-type femoroacetabular impingement and borderline developmental dysplasia of the hip -evaluation by virtual osteochondroplasty using computer simulation-
【24h】

Comparison of improved range of motion between cam-type femoroacetabular impingement and borderline developmental dysplasia of the hip -evaluation by virtual osteochondroplasty using computer simulation-

机译:凸轮型股骨髋臼撞击和髋关节边缘发育异常增生之间运动幅度改善的比较-通过虚拟骨软骨塑形术评估计算机模拟-

获取原文
           

摘要

Background While cam resection is essential to achieve a good clinical result with respect to femoroacetabular impingement (FAI), it is unclear whether it should also be performed in cases of borderline developmental dysplasia of the hip (DDH) with a cam deformity. The aim of this study was to evaluate improvements in range of motion (ROM) in cases of cam-type FAI and borderline DDH after virtual osteochondroplasty using a computer impingement simulation. Methods Thirty-eight symptomatic hips in 31 patients (11male and 20 female) diagnosed with cam-type FAI or borderline DDH were analyzed. There were divided into a cam-type FAI group (cam-FAI group: 15 hips), borderline DDH without cam group (DDH W/O cam group: 12 hips), and borderline DDH with cam group (DDH W/ cam group: 11 hips). The bony impingement point on the femoral head-neck junction at 90° flexion and maximum internal rotation of the hip joint was identified using ZedHip? software. Virtual osteochondroplasty of the impingement point was then performed in all cases. The maximum flexion angle and maximum internal rotation angle at 90° flexion were measured before and after virtual osteochondroplasty at two resection ranges (i.e., slight and sufficient). Results The mean improvement in the internal rotation angle in the DDH W/ cam group after slight resection was significantly greater than that in the DDH W/O cam group ( P =?0.046). Furthermore, the mean improvement in the internal rotation angle in the DDH W/ cam and cam-FAI groups after sufficient resection was significantly greater than that in the DDH W/O cam group (DDH W/ cam vs DDH W/O cam: P =?0.002, cam-FAI vs DDH W/O cam: P =?0.043). Conclusion Virtual osteochondroplasty resulted in a significant improvement in internal rotation angle in DDH W/ cam group but not in DDH W/O cam group. Thus, borderline DDH cases with cam deformity may be better to consider performing osteochondroplasty.
机译:背景技术尽管凸轮切除术对于获得股骨髋臼撞击(FAI)取得良好的临床效果至关重要,但尚不清楚在伴有凸轮畸形的髋关节边缘发育不良(DDH)的情况下是否也应进行凸轮切除术。这项研究的目的是使用计算机冲击仿真评估在虚拟骨软骨整形术后凸轮型FAI和边界DDH情况下运动范围(ROM)的改善。方法对31例确诊为凸轮型FAI或临界DDH的患者(38例男性,11例女性和20例)的症状性臀部进行分析。分为凸轮型FAI组(cam-FAI组:15髋),不带凸轮的边界DDH组(DDH W / O凸轮组:12髋)和带凸轮组的边界DDH(DDH W / cam组: 11髋)。使用ZedHip?可以确定90°屈曲时股骨头-颈部交界处的骨撞击点和最大的髋关节内旋。软件。然后在所有情况下进行撞击点的虚拟骨软骨成形术。在两个切除范围(即轻微且足够)下,在虚拟骨软骨成形术之前和之后测量最大屈曲角度和90°屈曲时的最大内部旋转角度。结果轻微切除后,DDH W /凸轮组的内转角平均改善显着大于DDH W / O凸轮组(P =?0.046)。此外,充分切除后,DDH W / cam和cam-FAI组内旋转角度的平均改善显着大于DDH W / O cam组(DDH W / cam vs DDH W / O cam:P = 0.002,cam-FAI与DDH W / O cam:P = 0.043)。结论虚拟骨软骨塑形术可显着改善DDH W /凸轮组的内部旋转角度,但不适用于DDH W / O凸轮组。因此,边缘性DDH伴有凸轮畸形的病例可能更适合考虑行骨软骨整形术。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号