首页> 外文期刊>BioMedical Engineering OnLine >Real-time feature extraction of P300 component using adaptive nonlinear principal component analysis
【24h】

Real-time feature extraction of P300 component using adaptive nonlinear principal component analysis

机译:基于自适应非线性主成分分析的P300成分实时特征提取

获取原文
       

摘要

Background The electroencephalography (EEG) signals are known to involve the firings of neurons in the brain. The P300 wave is a high potential caused by an event-related stimulus. The detection of P300s included in the measured EEG signals is widely investigated. The difficulties in detecting them are that they are mixed with other signals generated over a large brain area and their amplitudes are very small due to the distance and resistivity differences in their transmittance. Methods A novel real-time feature extraction method for detecting P300 waves by combining an adaptive nonlinear principal component analysis (ANPCA) and a multilayer neural network is proposed. The measured EEG signals are first filtered using a sixth-order band-pass filter with cut-off frequencies of 1 Hz and 12 Hz. The proposed ANPCA scheme consists of four steps: pre-separation, whitening, separation, and estimation. In the experiment, four different inter-stimulus intervals (ISIs) are utilized: 325 ms, 350 ms, 375 ms, and 400 ms. Results The developed multi-stage principal component analysis method applied at the pre-separation step has reduced the external noises and artifacts significantly. The introduced adaptive law in the whitening step has made the subsequent algorithm in the separation step to converge fast. The separation performance index has varied from -20 dB to -33 dB due to randomness of source signals. The robustness of the ANPCA against background noises has been evaluated by comparing the separation performance indices of the ANPCA with four algorithms (NPCA, NSS-JD, JADE, and SOBI), in which the ANPCA algorithm demonstrated the shortest iteration time with performance index about 0.03. Upon this, it is asserted that the ANPCA algorithm successfully separates mixed source signals. Conclusions The independent components produced from the observed data using the proposed method illustrated that the extracted signals were clearly the P300 components elicited by task-related stimuli. The experiment using 350 ms ISI showed the best performance. Since the proposed method does not use down-sampling and averaging, it can be used as a viable tool for real-time clinical applications.
机译:背景技术脑电图(EEG)信号涉及大脑中神经元的放电。 P300波是由事件相关的刺激引起的高电势。广泛研究了测得的脑电信号中包含的P300的检测。检测它们的困难在于它们会与在较大大脑区域上生成的其他信号混合,并且由于它们的透射率之间的距离和电阻率差异,它们的振幅非常小。方法提出了一种自适应非线性主成分分析(ANPCA)和多层神经网络相结合的P300波实时特征提取方法。首先使用截止频率为1 Hz和12 Hz的六阶带通滤波器对测得的EEG信号进行滤波。拟议的ANPCA方案包括四个步骤:预分离,增白,分离和估计。在实验中,利用了四个不同的激励间间隔(ISI):325 ms,350 ms,375 ms和400 ms。结果在预分离步骤中使用的开发的多级主成分分析方法显着减少了外部噪声和伪影。在美白步骤中引入的自适应法则使分离步骤中的后续算法快速收敛。由于源信号的随机性,分离性能指标从-20 dB到-33 dB不等。通过将ANPCA的分离性能指标与四种算法(NPCA,NSS-JD,JADE和SOBI)进行比较,评估了ANPCA对背景噪声的鲁棒性,其中ANPCA算法展示了最短的迭代时间,性能指标约为0.03。据此断言,ANPCA算法成功分离了混合源信号。结论使用所提出的方法从观测数据中产生的独立成分说明,提取的信号显然是与任务相关的刺激引起的P300成分。使用350 ms ISI的实验显示出最佳性能。由于建议的方法不使用下采样和平均,因此可以用作实时临床应用的可行工具。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号