首页> 外文期刊>Construction and Building Materials >Strength and durability studies of SCC incorporating silica fume and ultra fine GGBS
【24h】

Strength and durability studies of SCC incorporating silica fume and ultra fine GGBS

机译:结合硅粉和超细GGBS的SCC的强度和耐久性研究

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

The cost associated with the application of large volume of cement and synthetic admixtures was one of the major drawbacks of Self Compacting Concrete (SCC), which can be reduced by the use of supplementary cementitious materials (SCM). When the demand of cement reduces, the release of Carbon dioxide (CO2) from cement industries will come down, which has a positive impact on global warming. The present paper reports an attempt in this direction by experimental examination on the fresh and mechanical properties of SCC by replacing cement with SCM such as silica fume and ultra-fine Ground Granulated Blast Furnace Slag (GGBS) in varying ratios. SCC mix was obtained by fixing the water-binder ratio and changing super plasticizer (SP) dosage with respect to total cementitious content. Along with the mechanical properties, SCC mixes incorporating both alccofine and silica fume at 10% which gave the best strength were selected to assess the durability issues. Incorporating 10% silica fume gave the best result in both mechanical and durability studies in comparison with other combinations. The determination of the optimum mix containing both silica and alccofine was carried out by a statistical approach using Design of Experiments (DOE). DOE results gave optimum dosage of silica fume and alccofine as 6% and 8% respectively, which also satisfied the SCC property by changing the super plasticizer dosage. Experimentally obtained mechanical properties of the combination mix were in agreement with DOE results. (C) 2018 Elsevier Ltd. All rights reserved.
机译:与大量水泥和合成掺合料的应用相关的成本是自密实混凝土(SCC)的主要缺点之一,可以通过使用辅助胶结材料(SCM)来降低成本。当水泥需求减少时,水泥行业释放的二氧化碳(CO2)将会减少,这对全球变暖产生积极影响。本文通过实验检验,通过以不同比例的硅粉和超细粉碎颗粒化高炉矿渣(GGBS)等SCM替代水泥,对SCC的新鲜和机械性能进行了试验,从而尝试了这一方向。 SCC混合物是通过固定水灰比和改变超级增塑剂(SP)相对于总胶结含量的用量而获得的。除了机械性能,还选择了以10%的比例混合了Alcocofine和硅粉的SCC混合物,以提供最佳的强度,以评估其耐久性问题。与其他组合相比,掺入10%的硅粉在机械和耐久性研究中均提供了最佳结果。使用实验设计(DOE)通过统计方法确定同时包含二氧化硅和Alcocofine的最佳混合物。 DOE结果表明,硅粉和alcocofine的最佳用量分别为6%和8%,通过改变超级增塑剂的用量也满足了SCC性能。实验获得的混合混合物的机械性能与DOE结果一致。 (C)2018 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号