首页> 美国卫生研究院文献>Materials >Rheological Behavior and Microstructure Characteristics of SCC Incorporating Metakaolin and Silica Fume
【2h】

Rheological Behavior and Microstructure Characteristics of SCC Incorporating Metakaolin and Silica Fume

机译:含偏高岭土和硅粉的SCC的流变行为和微观结构特征

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

This study explores the effects of metakaolin (MK) and silica fume (SF) on rheological behaviors and microstructure of self-compacting concrete (SCC). The rheology, slump flow, V-funnel, segregation degree (SA), and compressive strength of SCC are investigated. Microstructure characteristics, including hydration product and pore structure, are also studied. The results show that adding MK and SF instead of 4%, 6% and 8% fly ash (FA) reduces flowability of SCC; this is due to the fact that the specific surface area of MK and SF is larger than FA, and the total water demand increases as a result. However, the flowability increases when replacement ratio is 2%, as the small MK and SF particles will fill in the interstitial space of mixture and more free water is released. The fluidity, slump flow, and SA decrease linearly with the increase of yield stress. The total amount of SF and MK should be no more than 6% to meet the requirement of self-compacting. Adding MK or SF to SCC results in more hydration products, less Ca(OH)2 and refinement of pore structure, leading to obvious strength and durability improvements. When the total dosage of MK and SF admixture is 6%, these beneficial effects on workability, mechanical performance, and microstructure are more significant when SF and MK are applied together.
机译:这项研究探讨了偏高岭土(MK)和硅粉(SF)对自密实混凝土(SCC)的流变行为和微观结构的影响。研究了SCC的流变性,坍落度,V形漏斗,偏析度(SA)和抗压强度。还研究了微观结构特征,包括水合产物和孔结构。结果表明,添加MK和SF代替4%,6%和8%的粉煤灰(FA)会降低SCC的流动性。这是由于MK和SF的比表面积大于FA,因此总需水量增加。但是,当置换率为2%时,流动性增加,因为小的MK和SF颗粒将填充混合物的空隙空间,并释放出更多的自由水。随着屈服应力的增加,流动性,坍落度和SA呈线性下降。 SF和MK的总量应不超过6%,以满足自密实的要求。在SCC中添加MK或SF可以产生更多的水合产物,减少Ca(OH)2并细化孔结构,从而显着提高强度和耐久性。当MK和SF混合物的总用量为6%时,将SF和MK一起使用时,这些对可加工性,机械性能和微观结构的有益影响就更加明显。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号