首页> 外文期刊>Circuits, Devices & Systems, IET >Experimental demonstration of a 10BASE-T Ethernet visible light communications system using white phosphor light-emitting diodes
【24h】

Experimental demonstration of a 10BASE-T Ethernet visible light communications system using white phosphor light-emitting diodes

机译:使用白色磷光发光二极管的10BASE-T以太网可见光通信系统的实验演示

获取原文
获取原文并翻译 | 示例

摘要

In this study, a compact design of a highly efficient, and a high luminosity light-emitting diode (LED)-based visible light communications system is presented, which is capable of providing standard room illumination levels and also wide-coverage Ethernet 10BASE-T optical wireless downlink communications over a distance of 2.3 m using commercial white light phosphor LEDs. The measured signal-to-noise ratio of the designed Ethernet system is >45 dB, thus allowing error-free communications with both on-off keying non-return zero and differential Manchester-coded modulation schemes at 10 Mbps. The uplink has been provided via a wireless infra-red link. A comparative study of a point-to-point wired local area network (LAN) and the optical wireless link confirms no discernible differences between them. The design of the transmitter is also shown to be scalable, with the frequency response for driving 25 LEDs being almost the same as driving a single LED. LED driving units are designed to match with the Ethernet sockets (RJ45) that conform to the existing LAN infrastructures (building and portable devices).
机译:在这项研究中,提出了一种紧凑,高效,基于高发光二极管(LED)的可见光通信系统的设计,该系统能够提供标准的室内照明水平,并具有广域以太网10BASE-T使用商用白光磷光体LED在2.3 m的距离上进行光学无线下行链路通信。设计的以太网系统的测得信噪比> 45 dB,因此可以实现开/关键控不归零和差分曼彻斯特编码调制方案(10 Mbps)的无差错通信。上行链路已通过无线红外链路提供。对点对点有线局域网(LAN)和光无线链路的比较研究确认它们之间没有明显的区别。发射机的设计也显示出可扩展性,驱动25个LED的频率响应几乎与驱动单个LED相同。 LED驱动单元设计为与符合现有LAN基础设施(建筑物和便携式设备)的以太网插座(RJ45)匹配。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号