Removal of Organic Films from Solid Surfaces Using Aqueous Solutions of Nonionic Surfactants. 1. Experiments

摘要

An important step in the production of printed wiring assemblies (PWAs) is the postsolder removal of flux residues from the surface. Traditionally, this has been accomplished using CFC-113-based solutions, but the Montreal Protocol and the Clean Air Acts have forced the development of alternative cleaners. This is a study of the mechanisms by which aqueous solutions of a nonionic surfactant (pentaethylene glycol mono-n-dodecyl ether (C_(12)E_5)) remove films of flux residues (abietic acid in isopropyl alcohol) from PWA surfaces. Cleaning rates were studied in a rotating disk apparatus to control hydrodynamic conditions. The cleaning process followed a three-step mechanism. In the first stage, surfactant liquefies the organic by partitioning into the film. In the second and third stages, shear stresses at the PWA surface remove aggregates of the surfactant-laden liquefied AA from the bulk AA film and the PWA substrate, respectively.