首页> 外文期刊>CEAS Aeronautical Journal >Investigation of a simplified aerodynamic modelling technique for noise predictions using FW-H propagation
【24h】

Investigation of a simplified aerodynamic modelling technique for noise predictions using FW-H propagation

机译:使用FW-H传播的用于噪声预测的简化空气动力学建模技术的研究

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

This paper addresses the influence of the elastic rotor blade deformation and the aerodynamic interference from the fuselage on the rotor aerodynamics, including rotor noise characteristics. A BO105 main rotor/fuselage configuration is chosen for the numerical simulations. An unsteady aerodynamic code based on free wake three-dimensional panel method (UPM) is used to account for nonlinear effects associated with the mutual interference between main rotor and fuselage. Airbus Helicopters' (formerly: Eurocopter) rotor code (HOST) is coupled with this aerodynamic code (UPM) to account for the effect of elastic blade deformation. The effect of the fuselage is simulated using two fuselage models in aerodynamic code, (1) potential theory in the form of a panelized fuselage and (2) an analytic fuselage influence formulation derived from isolated fuselage simulation. The advantage of (2) is in its computational efficiency. The aerodynamic modelling is then coupled with an aero-acoustic post-processing tool based on the Ffowcs-Williams-Hawkings (FW-H) approach for evaluating the noise propagation to the far-field. This toolchain is then evaluated in different flight conditions to assess the usability of this approach in the design process. In descending flight, the acoustic prediction is completed at a very mature level, as the blade vortex interaction is well captured. In climb, the major noise peak is underpredicted, while the overall directivity agreement is well matched. In forward flight, due to a phase shift in the airloads prediction, parts of the loading noise directivity are not well captured. The onset of transonic effects further degrades the results obtained at the front of the rotor. For the investigated flight cases, the analytical fuselage formulation brought very similar results to the panelized fuselage model, therefore proving its worthiness for further accelerating the simulation in these flight conditions.
机译:本文讨论了弹性转子叶片变形和机身的空气动力学干扰对转子空气动力学的影响,包括转子噪声特性。选择BO105主旋翼/机身配置进行数值模拟。基于自由唤醒三维面板方法(UPM)的非稳态空气动力学代码用于解决与主旋翼和机身之间相互干扰相关的非线性影响。空中客车直升机公司(以前的名称:欧洲直升机公司)的旋翼代码(HOST)与该空气动力学代码(UPM)结合使用,以说明弹性叶片变形的影响。使用两个符合空气动力学规范的机身模型来模拟机身的效果,(1)面板化机身形式的势能理论,以及(2)从孤立机身模拟中得出的解析机身影响公式。 (2)的优点在于其计算效率。然后,将空气动力学建模与基于Ffowcs-Williams-Hawkings(FW-H)方法的空气声学后处理工具相结合,以评估噪声向远场的传播。然后在不同的飞行条件下评估该工具链,以评估此方法在设计过程中的可用性。在下降飞行中,由于可以很好地捕获叶片涡旋相互作用,因此声学预测会在非常成熟的水平上完成。在爬升过程中,主要的噪声峰值被低估了,而总体方向性一致性很好。在前向飞行中,由于空载预测中存在相移,因此无法很好地捕获部分负载噪声方向性。跨音速效应的出现进一步降低了在转子前部获得的结果。对于所研究的飞行情况,机身分析公式与面板化机身模型具有非常相似的结果,因此证明了其在进一步加速这些飞行条件下的仿真方面的价值。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号