首页> 外文期刊>Applied Surface Science >Theoretical description of the kinetics of solute adsorption at heterogeneous solid/solution interfaces On the possibility of distinguishing between the diffusional and the surface reaction kinetics models
【24h】

Theoretical description of the kinetics of solute adsorption at heterogeneous solid/solution interfaces On the possibility of distinguishing between the diffusional and the surface reaction kinetics models

机译:固相/固相界面固溶吸附动力学的理论描述关于区分扩散反应模型和表面反应动力学模型的可能性

获取原文
获取原文并翻译 | 示例

摘要

The kinetics of adsorption at solid/liquid interfaces is of crucial importance for life on our planet and a variety of technological processes. Let us remark, for instance, that the oxide/electrolyte interface is the largest natural interface existing on the earth. It is very impressive to observe the growing number of the papers reporting on application of adsorption processes in the technologies of environmental protection. The purification of wastewaters, for instance, has become one of the largest industries now. To optimize the cost and performance of the adsorption technology, one has to consider both the costs of sorbents, and the efficiency of the adsorption process. That efficiency is related not only to the equilibrium features of an adsorption system but also to the kinetics of the adsorption process. In technological processes a sorbent and a solution are brought into contact for a limited period of time, so, the rate of the transport of solute molecules from the bulk to the adsorbed phase is here of a primary importance. According to some generally expressed views a sorption process can be described by four consecutive kinetic steps: 1. transport in the bulk solution; 2. diffusion across the film surrounding the sorbent particles; 3. diffusion in the pores of the sorbent; 4. sorption and desorption on the solid surface viewed as a kind of chemical reaction. One of these steps is the slowest and controls the rate of sorption. Depending on the assumption which of these steps is the rate-controlling one, a variety of equations have been proposed in literature to describe that kinetic step. The knowledge of the nature of that kinetic and its theoretical description are very crucial for practical applications, as a key to design the adsorption equipment and conditions for an optimum efficiency to be achieved. So, first some laboratory experimental tests and next their subsequent theoretical analyses are carried out to elucidate the nature of the rate-controlling kinetic process. Such studies may involve a variety of experiments whose time dependence of adsorption is the most fundamental information. Sometimes accompanying studies of the corresponding adsorption equilibria are also carried out, but it seems that the importance of these studies has not been sufficiently recognized. Only such combined study creates a chance to distinguish correctly between one and another kinetic model to be assumed. However, the most essential condition is using proper theoretical expressions to represent the features of some kind of kinetics. Here we will show how the above-mentioned conditions may affect distinguishing between the kinetics which is governed by the intraparticle diffusion, and that in which surface reactions control the rate of sorption in an adsorption system. This is because these two kinetic models are most frequently assumed in the theoretical interpretation of experimental kinetic data.
机译:固/液界面处的吸附动力学对于我们星球上的生命以及各种技术过程至关重要。例如,让我们指出,氧化物/电解质界面是地球上最大的自然界面。令人印象深刻的是,越来越多的论文报道了吸附工艺在环境保护技术中的应用。例如,废水净化已成为当今最大的行业之一。为了优化吸附技术的成本和性能,必须同时考虑吸附剂的成本和吸附过程的效率。该效率不仅与吸附系统的平衡特征有关,而且与吸附过程的动力学有关。在工艺过程中,吸附剂和溶液要在有限的时间内接触,因此,溶质分子从本体到吸附相的传输速率在这里至关重要。根据一些普遍表达的观点,可以通过四个连续的动力学步骤描述吸附过程:1.在本体溶液中运输; 2.扩散穿过吸附剂颗粒周围的薄膜; 3.在吸附剂的孔中扩散; 4.在固体表面上的吸附和解吸被视为一种化学反应。这些步骤之一是最慢的,并且控制吸附速率。根据这些步骤中哪个是速率控制的假设,文献中提出了各种方程式来描述该动力学步骤。该动力学性质的知识及其理论描述对于实际应用至关重要,因为它是设计吸附设备和实现最佳效率的条件的关键。因此,首先进行一些实验室实验测试,然后进行随后的理论分析,以阐明速率控制动力学过程的性质。这些研究可能涉及各种实验,这些实验的吸附时间依赖性是最基本的信息。有时还进行了相应吸附平衡的伴随研究,但似乎这些研究的重要性尚未得到充分认识。只有这样的组合研究才有机会正确地区分要假定的一个和另一个动力学模型。但是,最基本的条件是使用适当的理论表达式来表示某种动力学的特征。在这里,我们将显示上述条件如何影响区分由颗粒内扩散控制的动力学和表面反应控制吸附系统中吸附速率的动力学。这是因为在实验动力学数据的理论解释中最经常采用这两个动力学模型。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号