...
首页> 外文期刊>Applied Surface Science >Single material TiO_2 thin film by atomic layer deposition for antireflection and surface passivation applications on p-type c-Si
【24h】

Single material TiO_2 thin film by atomic layer deposition for antireflection and surface passivation applications on p-type c-Si

机译:原子层沉积的单材料TiO_2薄膜在p型c-Si上的减反射和表面钝化应用

获取原文
获取原文并翻译 | 示例

摘要

A thin film deposited on the front surface of solar cell plays an important role in reducing the reflection of incident light and providing surface passivation. Although ultrathin TiO2 films have shown excellent performance of surface passivation, simultaneously serving both functions is hindered by the crystallization issue, which can degrade the passivation quality of TiO2 film, as the film thickness is over certain value (few nanometer only). Here we showed that both functions can be satisfied by single material of titanium oxide film through atomic layer deposition at low temperatures. By varying deposition temperatures from 80 to 200 degrees C, the TiO2 film deposited at 80 degrees C can maintain its amorphous phase up to the thickness of 114 nm. In addition, the optimal thickness for antireflection calculated by OPAL 2 is 61 nm, meaning that amorphous TiO2 film to provide antireflection and surface passivation can be achieved. The passivation quality is verified by minority carrier lifetime measurement using photo-conductance decay method and presented the ultralow surface recombination velocity of 8.7 cm/s. Furthermore, the passivation mechanism is investigated by X-ray diffraction (XRD) and secondary ion mass spectroscopy (SIMS), in which the absence of crystalline issue is confirm and both chemical passivation (due to H termination) and field effect passivation (due to residual Cl atoms) are associated with the improvement of passivation quality. A post deposition anneal is conducted on the TiO2 film deposited at 80 degrees C. The results present that extra thermal budgets can ruin the passivation quality, which is explicated by the TiO2 crystallization as the temperature exceeding 350 degrees C from the XRD measurements, and by the descending of Cl atom (also field effect passivation) as increasing of the annealing temperature from the SIMS measurements. (C) 2018 Elsevier B.V. All rights reserved.
机译:沉积在太阳能电池前表面上的薄膜在减少入射光的反射和提供表面钝化方面起着重要作用。尽管超薄TiO2膜表现出优异的表面钝化性能,但结晶问题阻碍了同时发挥两种功能,因为膜厚超过一定值(仅几纳米),会降低TiO2膜的钝化质量。在这里,我们表明,通过在低温下通过原子层沉积,钛氧化物膜的单一材料可以满足两种功能。通过将沉积温度从80摄氏度更改为200摄氏度,在80摄氏度下沉积的TiO2薄膜可以保持其非晶相直至114 nm的厚度。另外,通过OPAL 2计算出的最佳抗反射厚度为61 nm,这意味着可以实现提供抗反射和表面钝化作用的非晶TiO2膜。通过使用光电导衰减法测量少数载流子的寿命来验证钝化质量,并给出了8.7 cm / s的超低表面复合速度。此外,通过X射线衍射(XRD)和二次离子质谱(SIMS)研究了钝化机理,其中确定了不存在晶体问题,并且化学钝化(由于H终止)和场效应钝化(由于残余Cl原子)与钝化质量的提高有关。在80摄氏度下沉积的TiO2薄膜上进行了沉积后退火。结果表明,额外的热预算可能会破坏钝化质量,而XRD测量表明,当温度超过350摄氏度时,TiO2结晶会加剧钝化质量。根据SIMS测量,随着退火温度的升高,Cl原子的下降(也就是场效应钝化)。 (C)2018 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号