HTS current lead using a composite heat pipe

摘要

This paper discusses the design and fabrication of HTS current leads being built by Los Alamos to supply power to a demonstration HTS coil which will operate in a vacuum cooled by a cryocooler. Because vapor cooling is not an option for this application the leads must be entirely conductively cooled. In the design of HTS current leads for this type of application, it is desirable to intercept part of the heat load at an intermediate temperature. This thermal intercept or connection must be electrically insulating but thermally conductive, two mutually exclusive properties of most candidate solid materials. To achieve this end we incorporate a composite nitrogen heat pipe, constructed of conducting and nonconducting materials, to provide efficient thermal communication and simultaneously, electrical isolation between the lead and the intermediate temperature heat sink. Another important feature of the current lead design is the use of high Jc thick film superconductors deposited on a nonconducting substrate to reduce the conductive heat leak through the lower portion of the lead. Two flexible electrical conductors are incorporated to accommodate handling, assembly and the dissimilar expansion coefficients of the various materials.