Mechanical Performance of the First Two Prototype 4.5 m Long Nb3Sn Low-β Quadrupole Magnets for the Hi-Lumi LHC Upgrade

摘要

The U.S. High-Luminosity LHC Accelerator Upgrade Project (HL-LHC AUP) team is collaborating with CERN in the design and fabrication of the first 4.5 & x00A0;m long MQXFA magnets, a 150 & x00A0;mm aperture high-field Nb₃Sn quadrupole magnet that uses the aluminum shell-based bladder-and-key technology. The first two prototype magnets, MQXFAP1 and MQXFAP2, were assembled and tested while the first pre-series structure (MQXFA03) was in fabrication. This paper summarizes the mechanical performance of these prototype structures based on the comparison of measured strain gauge data with finite element model analyses from all load steps to powering. The MQXFAP1 magnet almost reached ultimate current before a short to ground was detected and the test was stopped. The MQXFAP2 magnet experienced a low training performance due to a fractured aluminum shell. MQXFAP1b was rebuilt with a new replacement coil, but an old coil limited the magnet from achieving the ultimate current. The mitigations and analyses of these prototype magnets are discussed in the context of the transition to pre-series production.