首页> 外文期刊>IEEE Transactions on Applied Superconductivity >Sector magnets for the RIKEN superconducting ring cyclotron
【24h】

Sector magnets for the RIKEN superconducting ring cyclotron

机译:RIKEN超导环回旋加速器的扇形磁铁

获取原文
获取原文并翻译 | 示例
           

摘要

The sector magnets of the K2500-MeV superconducting ring cyclotron (SRC), which is under construction for the RIKEN RI beam factory, are described. The SRC consists of six sector magnets, four rf resonators, etc. each sector magnet is 7.2 m in length and 6 m in height and 800 t (metric ton) in weight; the sector angle is 25 deg. The required maximum magnetic field is 3.8 T. the superconductor for the main and trim coil has a rectangular shape (8 mm by 15 mm) consisting of a Rutherford-type NbTi cable located at the center of an Al-alloy stabilizer housing. The main coil is bath-cooled and the trim coil is directly cooled. Each component of the sector magnet as well as the cryogenic cooling system was completed in the spring of 2003.
机译:描述了正在为RIKEN RI梁工厂建造的K2500-MeV超导环回旋加速器(SRC)的扇形磁体。 SRC由六个扇形磁体,四个rf谐振器等组成。每个扇形磁体的长度为7.2 m,高度为6 m,重量为800 t(公吨)。扇形角为25度。所需的最大磁场为3.8T。主线圈和微调线圈的超导体具有矩形形状(8毫米乘15毫米),由位于铝合金稳定器外壳中央的Rutherford型NbTi电缆组成。主线圈采用浴冷却,微调线圈直接冷却。扇形磁铁的每个组件以及低温冷却系统均于2003年春季完成。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号