...
首页> 外文期刊>Applied Mathematical Modelling >A rapid granular chute avalanche impinging on a small fixed obstacle: DEM modeling, experimental validation and exploration of granular stress
【24h】

A rapid granular chute avalanche impinging on a small fixed obstacle: DEM modeling, experimental validation and exploration of granular stress

机译:撞击小型固定障碍物的快速粒状溜槽雪崩:DEM建模,实验验证和粒状应力探索

获取原文
获取原文并翻译 | 示例
           

摘要

Granular flows are constrained by applied stresses. When a granular flow moves rapidly and impinges on an obstacle, the stress is significantly increased along the contact force networks. Granular stresses are still incompletely understood. The aim of this study is to investigate a rapid avalanche of spherical glass beads in an inclined chute with a small fixed semi-cylindrical obstacle by using particle image velocimetry (PIV) technique and discrete element method (DEM). The proposed DEM model produces good agreement with the corresponding avalanche experiment in terms of the velocity profiles. The validated DEM results are then used to explore the internal flow characteristics of a granular avalanche that are not directly observable in experiments, such as the solid fraction, the average coordination number and the granular stress. Rectangular measurement cells, similar to representative volume elements, are developed to determine the spatial variation in stresses for the granular avalanche. The internal flow characteristics of a rapid granular avalanche with and without obstacles are compared. For the unobstructed flow, the normal and shear stresses decrease in the downstream direction because the solid fraction and the average coordination number decrease, resulting from the gravitational acceleration. On the other hand, granular jamming forms in front of the semi-cylindrical obstacle and results in a significant increase in the normal and shear stresses. The unobstructed flow shows slightly anisotropic stress states, giving an earth pressure coefficient of approximately 1.0, whereas the disturbed flow exhibits strongly anisotropic stress states. The simulation results show that the corresponding earth pressure coefficient can be much higher than unity and increases to a maximum value of roughly 5.0. A shear band develops at a distance of roughly twice the particle diameter above the basal surface and a stronger shear band forms in the upstream vicinity of the obstacle. (C) 2019 Elsevier Inc. All rights reserved.
机译:颗粒流受到施加应力的限制。当粒状流快速移动并撞击障碍物时,沿接触力网络的应力会显着增加。颗粒应力仍未完全理解。这项研究的目的是通过使用粒子图像测速(PIV)技术和离散元素方法(DEM),研究在带有小的固定半圆柱形障碍物的倾斜斜槽中快速崩解球形玻璃珠的过程。提出的DEM模型在速度分布方面与相应的雪崩实验产生了很好的一致性。然后,将经过验证的DEM结果用于探索在实验中无法直接观察到的颗粒雪崩的内部流动特性,例如固体分数,平均配位数和颗粒应力。开发矩形测量单元,类似于代表性的体积元素,以确定颗粒雪崩应力的空间变化。比较了有和没有障碍物的快速颗粒雪崩的内部流动特性。对于畅通的流动,由于重力加速度导致固体分数和平均配位数减少,因此下游方向的正应力和剪应力减小。另一方面,在半圆柱形障碍物前面形成颗粒状堵塞,导致法向应力和剪切应力显着增加。畅通无阻的水流显示出各向异性的应力状态,土压力系数约为1.0,而扰动的水流显示出强烈的各向异性应力状态。仿真结果表明,相应的土压力系数可能远大于1,并增加到约5.0的最大值。剪切带在基面上方大约是粒径的两倍处形成,并且更强的剪切带在障碍物的上游附近形成。 (C)2019 Elsevier Inc.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号