首页> 美国卫生研究院文献>Springer Open Choice >Measurement of the photon identification efficiencies with the ATLAS detector using LHC Run-1 data
【2h】

Measurement of the photon identification efficiencies with the ATLAS detector using LHC Run-1 data

机译:使用LHC Run-1数据使用ATLAS探测器测量光子识别效率

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

The algorithms used by the ATLAS Collaboration to reconstruct and identify prompt photons are described. Measurements of the photon identification efficiencies are reported, using 4.9 fb-1 of pp collision data collected at the LHC at s=7 TeV and 20.3 fb-1 at s=8 TeV. The efficiencies are measured separately for converted and unconverted photons, in four different pseudorapidity regions, for transverse momenta between 10 GeV and 1.5 TeV. The results from the combination of three data-driven techniques are compared to the predictions from a simulation of the detector response, after correcting the electromagnetic shower momenta in the simulation for the average differences observed with respect to data. Data-to-simulation efficiency ratios used as correction factors in physics measurements are determined to account for the small residual efficiency differences. These factors are measured with uncertainties between 0.5% and 10% in 7 TeV data and between 0.5% and 5.6% in 8 TeV data, depending on the photon transverse momentum and pseudorapidity.
机译:描述了ATLAS协作组织用于重建和识别快速光子的算法。报告了使用LHC在 s = 7 TeV和20.3 fb -1 s = 8 TeV。在10个GeV和1.5个TeV之间的横向动量下,分别在四个不同的伪快速区域中分别测量转换和未转换光子的效率。在校正了针对数据观察到的平均差异的仿真中的电磁淋浴动量之后,将三种数据驱动技术的组合结果与检测器响应仿真的预测结果进行比较。确定在物理测量中用作校正因子的数据模拟效率比,以解决较小的残留效率差异。这些因素的测量不确定性在7 TeV数据中介于0.5%到10%之间,在8 TeV数据中介于0.5%到5.6%之间,具体取决于光子横向动量和伪快速度。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号