Despite the many potential applications of an accurate indoor positioning system (IPS), no universal, readily available system exists. Much of the IPS research to date has been based on the use of radio transmitters as positioning beacons. Visible light positioning (VLP) instead uses LED lights as beacons. Either cameras or photodiodes (PDs) can be used as VLP receivers, and position estimates are usually based on either the angle of arrival (AOA) or the strength of the received signal. Research on the use of AOA with photodiode receivers has so far been limited by the lack of a suitable compact receiver. The quadrature angular diversity aperture receiver (QADA) can fill this gap. In this paper, we describe a new QADA design that uses only three readily available parts: a quadrant photodiode, a 3D-printed aperture, and a programmable system on a chip (PSoC). Extensive experimental results demonstrate that this design provides accurate AOA estimates within a room-sized test chamber. The flexibility and programmability of the PSoC mean that other sensors can be supported by the same PSoC. This has the potential to allow the AOA estimates from the QADA to be combined with information from other sensors to form future powerful sensor-fusion systems requiring only one beacon.
展开▼
