首页> 美国卫生研究院文献>Sensors (Basel Switzerland) >Unimodular Multi-Input Multi-Output Waveform and Mismatch Filter Design for Saturated Forward Jamming Suppression
【2h】

Unimodular Multi-Input Multi-Output Waveform and Mismatch Filter Design for Saturated Forward Jamming Suppression

机译:用于饱和前向干扰抑制的单模多输入多输出波形和失配滤波器设计

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Forward jammers replicate and retransmit radar signals back to generate coherent jamming signals and false targets, making anti-jamming an urgent issue in electronic warfare. Jamming transmitters work at saturation to maximize the retransmission power such that only the phase information of the angular waveform at the designated direction of arrival (DOA) is retained. Therefore, amplitude modulation of MIMO radar angular waveforms offers an advantage in combating forward jamming. We address both the design of unimodular MIMO waveforms and their associated mismatch filters to confront mainlobe jamming in this paper. Firstly, we design the MIMO waveforms to maximize the discrepancy between the retransmitted jamming and the spatially synthesized radar signal. We formulate the problem as unconstrained non-linear optimization and solve it using the conjugate gradient method. Particularly, we introduce fast Fourier transform (FFT) to accelerate the numeric calculation of both the objection function and its gradient. Secondly, we design a mismatch filter to further suppress the filtered jamming through convex optimization in polynomial time. The simulation results show that for an eight-element MIMO radar, we are able to reduce the correlation between the angular waveform and saturated forward jamming to −6.8 dB. Exploiting this difference, the mismatch filter can suppress the jamming peak by 19 dB at the cost of an SNR loss of less than 2 dB.
机译:前向干扰器复制并重新传回雷达信号以产生相干的干扰信号和虚假目标,这使得抗干扰成为电子战中的紧迫问题。干扰发射机在饱和时工作,以最大限度地提高重传功率,以便仅保留指定到达方向 (DOA) 的角度波形的相位信息。因此,MIMO 雷达角度波形的幅度调制在对抗前向干扰方面具有优势。在本文中,我们讨论了单模 MIMO 波形的设计及其相关的失配滤波器,以应对主瓣干扰。首先,我们设计了 MIMO 波形,以最大限度地减小重传干扰与空间合成雷达信号之间的差异。我们将问题表述为无约束非线性优化,并使用共轭梯度法求解。特别是,我们引入了快速傅里叶变换 (FFT) 来加速异议函数及其梯度的数值计算。其次,我们设计了一个失配滤波器,通过在多项式时间内的凸优化来进一步抑制滤波的干扰。仿真结果表明,对于八元 MIMO 雷达,我们能够将角波形和饱和前向干扰之间的相关性降低到 −6.8 dB。利用这一差异,失配滤波器可以将干扰峰值抑制 19 dB,但 SNR 损失小于 2 dB。

著录项

  • 期刊名称 Sensors (Basel Switzerland)
  • 作者单位
  • 年(卷),期 2024(24),18
  • 年度 2024
  • 页码 5884
  • 总页数 21
  • 原文格式 PDF
  • 正文语种
  • 中图分类
  • 关键词

    机译:电子对抗、干扰抑制、MIMO 雷达、波形分集、雷达信号处理、脉冲压缩;
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号