The Influence of the Use of Polymer Lining within the Roller Press Gravity Feeder on Briquette Quality

摘要

When considering the operation of roller presses for the consolidation of fine-grained materials, the main problems are disturbances in the proper flow of the material and its bridging in gravity feeders. This is especially true for small and medium capacity presses, where the hoppers for dosing the material are narrow. This article presents innovative laboratory tests of the impact of using a polymer plate lining in the gravity feeder of a roller press. Polymer materials Polyacetal C (POM C) and Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) were used for the tests. The influence of the use of plates on the material flow and quality of briquettes was investigated in comparison with the case where such plates were not used. The research showed an improvement in the flow of fine-grained materials in the feeder and an increase of the briquette strength indexes, as compared to those cases when polymer linings were not used in the feeder.